2.Move the pointer to the character to be replaced
by pressing 
or 
. Then move the cursor to the character area and select a new character.
3.Press 
to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press 
. All charac- ters in the editing area disappear.
To determine the display position of the CAMERA ID
1.Move the cursor to POSI, and press 
. The dis- play shown below appears and the CAMERA ID is highlighted.
Highlighted
2.Move the CAMERA ID to the desired position by
pressing 
/ 
/ 
/ 
.
3. Press 
to fix the position of the CAMERA ID. The mode returns to the previous CAMERA ID menu.
Notes:
•The CAMERA ID stops at the edges of the monitor screen.
•The CAMERA ID moves faster if any of 
/
/ 
/
is kept pressed for a second or
more.
2. Light Control Setting (ALC/ELC)
You can select the mode for adjusting the lens iris. The modes are as follows:
ALC: Select this mode when an auto iris lens (ALC lens) is used with this camera.
ELC: Select this mode when a fixed iris lens or manual iris lens is used with this camera.
| ** CAM SET UP ** | ||
CAMERA ID | OFF | ↵ | |
ALC/ELC | ALC | ↵ | |
SHUTTER | OFF |
| |
AGC |
| ON | |
SENS | UP | OFF |
|
SYNC |
| INT |
|
WHITE BAL | ATW1 ↵ | ||
MOTION DET | OFF |
| |
LENS | DRIVE | DC |
|
END | SET UP ENABLE | ||