Panasonic WV-CL920A Auto Iris Lens Connector, Flange-back Adjusting Ring FB, Down Button

qAuto Iris Lens Connector

This connector is used to connect the auto iris lens with a 4-pin male connector supplied as a standard accessory (Part No. YFE4191J100).

wFlange-back Adjusting Ring (FB)

This ring is used to adjust the back focal length or picture focus. Rotate this ring upward or downward for a CS-mount lens. In case of using a C-mount lens, adjust it with the C-mount adapter.

eFocus Fixing Screw (LOCK)

rCamera Mounting Screw Hole

This hole is used to mount the camera onto a mounting bracket.

tDown Button ( )

This button is used to move the cursor downward. It is also used to select items in the CAM SET UP menu.

yRight Button ( )

This button is used to move the cursor to the right. It is also used to select the mode and can be used to adjust some levels.

uLeft Button ( )

This button is used to move the cursor to the left. It is also used to select the mode and can be used to adjust some levels.

iUp Button ( )

This button is used to move the cursor upward. It is also used to select items in the CAM SET UP menu.

oSet Button ( )

This button is used to activate an item selected in the CAM SET UP menu.

!0Gen-lock Termination Switch (Hi-Z, G/L 75Ω )

Set this switch to Hi-Z when a gen-lock video input signal is looped through. In all other cases, set this switch to 75 Ω .

!1Gen-lock Input Connector (GEN-LOCK)

This connector is used to connect an external sys- tem for synchronization.

!2Video Output Connector (VIDEO OUT)

This connector is used to connect with the VIDEO IN connector of the monitor.

-7-