Axis Communications 2 Setup Tools, Positional Control of the Video Source, Focus bar, Auto button

AXIS 230 Operating the AXIS 230 17

Positional Control of the Video Source

Pan/Tilt devices connected to the AXIS 230’s ports can be controlled directly from the web interface, or by third-party applications. When using such a device, Pan and Tilt bars are automatically displayed, as shown in the example below. Note that the selected Pan/Tilt driver determines the actual layout of the controls. Other functions, not shown here, may also be available.

Click-in-picture Point and click to move the view to a new location.

Select Preset Position To enable quick and accu- rate camera positioning, up to 20 preset camera posi- tions can be set and selected at any time from the drop-down dialog.

Focus bar

Allows smooth focusing.

Auto button

Turns on automatic focusing.

Zoom bar

Allows smooth camera zoom between telescopic and wide viewing.

Tilt bar Allows smooth or stepped vertical pan- ning of the camera.

Home (H) Returns the camera to the ‘Home’ position.

Pan bar

Allows smooth or stepped hori- zontal panning of the camera.

Notes: •Pan/Tilt controls can be disabled in the Live View layout settings and might not be available in the user interface.

•Clicking anywhere on a bar’s gradient allows for a “smooth” adjustment; whereas clicking on the left or right arrows causes a stepped incremental change.

The Setup Tools

Clicking on the Setup link at the top left of the Live View page opens the Basic Configuration page, which provides links to the basic settings required by most systems. The settings found in the Basic Configuration section are described under the relevant section in the following pages.