Axis Communications 2 Preset position setup Zoom only, Preset position setup Pan, Tilt & Zoom

28	Operating the AXIS 230	AXIS 230
	Preset position setup - Zoom only

To add a new preset position for the zoom function, zoom the camera to the required magnification and then enter a descriptive name in the Current Position field and click Apply. To set a position as Home, check the box provided when that position is current. It is possible to go directly to the Home position from any other position - simply by clicking the H button. To remove a preset position, select it from the drop-down list and click Remove.

Preset position setup - Pan, Tilt & Zoom

To be able to pan and tilt the camera, a Pan/Tilt device and its driver must be added to the camera. The interface will then automatically provide pan and tilt bars. To add a new preset position for all 3 functions, use the controls to steer the camera so that it points to the desired position, and zoom and focus as required. Then add the preset as described above.

Please note that the selected driver will determine the actual layout.