Axis Communications 2 user manual Appendix F Technical Specifications

Page 55

AXIS 230

Technical Specifications

55

Appendix F - Technical Specifications

System Requirements - Windows® 2000 or Windows XP (with latest Service Pack.) AGP graphics card with 16 MB video memory and support for DirectDraw®. Use the latest available driver. Internet Explorer 5.5 or higher (with latest Service Pack.) DirectX® (latest version.)

Installation - Physical network connection using RJ-45 twisted pair cable. 10baseT or 100baseTX Fast Ethernet.

Management - Remote configuration and status using Web-based tools.

Video Features - MPEG-2 video compression. Configurable resolution, color and quality levels.

Audio In - One 3.5mm input for stereo or mono microphone, or for line-in stereo or mono signal. The logical port is selected in the web interface.

Stereo microphone input - High sens. Max:-39.0 dBu (25 mVpp)

Stereo microphone input - Low sens. Max:-18.1 dBu (270 mVpp)

Line input - Max:+2.7 dBu (3.0 Vpp)

Supported Network protocols - TCP/IP, HTTP, FTP, SMTP, NTP, ARP, DHCP, BOOTP, RTP

Terminal block connector - 2 digital inputs (max 12 V in) and 1 transistor output (max 24 V, 0.1 A). 1 pin for ground. 2 pins for RS-485 serial communication.

Pre/Post Alarm Buffer - Approximately 15 MB memory for storage of pre/post alarm video.

Serial Connector - One 9-pin D-Sub RS-232, max 115 Kbit/s.

Pan/Tilt - Pan/Tilt support via RS-232 or RS-485 for remote camera control. See www.axis.com or the online help for information about supported devices.

Security - Multi-user and multi-level password protection.

Operating Conditions: - Temp: +5o to +50o C (41o to 122o F). Humidity: 20-80% RH.

Illumination - Min illumination = 0,7 lux (at F1.4 1/60s NTSC or 1/50s PAL) (50IRE) (down to 0.01 lux, depending on shutter speed.) Recommended illumination: 100 to 100.000 lux.

Image 55

Contents Axis 230 MPEG-2 Network Camera User’s Manual Legal Considerations Safety Notices Used in This ManualAxis Support Services About This DocumentTable Of Contents Appendix a Troubleshooting Battery should not be replaced unless required Safety Notice Battery ReplacementIntroduction Features and BenefitsAxis Introduction Applications Axis 230 Front Product DescriptionAxis 230 Rear Panel Title/Variant Quantity Hardware InventoryInstallation using Axis IP Utility Installing the AxisManual Installation with ARP and Ping Client System Requirements Axis Media Control Viewing Client Configuring audio equipment Accessing the Axis 230 from Internet ExplorerOperating the Axis Accessing and logging on to the AxisFocus bar Autofocus button Access from a browserSetup tools Live ViewAuto button Setup ToolsPositional Control of the Video Source Focus barResolution Video SettingsAdvanced Settings Live View Layout Audio SettingsEvents and Event Types Configuring Event TypesGeneral Setting up a new event typeRespond to Trigger Trigger Type When TriggeredOperating the Axis Adding an Upload Server Upload ServersNotification Servers Port Status Port Status & DevicesDevices Preset position setup Pan, Tilt & Zoom Preset position setup Zoom onlySystem Options Accessing The System OptionsSystem Options Overview Administration DescriptionUsers Adding Allowed IP Addresses Firewall SettingsAdding Users Editing and Deleting UsersCurrent Server Time Date & TimeNew Server Time Parameter Description TCP/IP Network SettingsAutomatic IP Configuration Dynamic IP Address Notification SettingsNetwork Traffic Manual IP ConfigurationRTP Multicast Settings Smtp email Network SettingsIO Ports Ports & DevicesCOM Ports RS-232/RS-485 Support Logs & Reports MaintenanceFactory Default Settings Server Report Appendix a TroubleshootingChecking the Firmware SupportSymptoms Possible causes Remedial actions Symptoms, Possible Causes and Remedial ActionsMic or audio input device Ping Reply Interpretation and recommendation Pinging Your IP AddressEmergency Recovery Procedure Update via FTPAppendix B Updating the Firmware Updating the Firmware Axis Appendix C Customizing The Axis Configuration via FTPModifying the File System Custom Web Pages Customizing ProceduresEditing and Storing Your Web These lines should be added to the file as shown below Using your own file as a New HomeOr, if PTZ is enabled Terminal Block Pinout D-Sub ConnectorAppendix D Unit Connections Terminal BlockSchematic Diagram Terminal Connector Block Installation Procedure Connecting Pan/Tilt DevicesBrowser Administration Tools Querying the Status of Digital Inputs Controlling and MonitoringTransistor Output Digital InputsExample Monitor data on inputs 1 Appendix E Audio Settings Appendix F Technical Specifications Technical Specifications Axis Video Quality Level Appendix G BandwidthVideo Quality vs. Bit Rate Unicast Multicast Other ConsiderationsIndex IndexIndex Axis Smtp Glossary of Terms

Related manuals

Manual 6 pages 28.49 Kb