Axis Communications AXIS 207MW, AXIS 207W manual Installation steps, Package contents

AXIS 207/207W/207MW Installation Guide Page 3

AXIS 207/207W/207MW

Installation Guide

This installation guide provides instructions for installing the AXIS 207/207W/207MW Network Camera on your network. For all other aspects of using the product, please see the User’s Manual, which is available on the CD included in this package, or from www.axis.com/techsup

Installation steps

1.Check the package contents against the list below.

2.Hardware overview. Familiarize yourself with the camera. See page 4.

3.Install the hardware and make all cable connections. See page 7.

ENGLISH

4.Set an IP address. See page 8.

5.Set the password. See page 12.

6.Configure the wireless connection. See page 13.

7.Adjust the focus. See page 15.

1. Package contents

Important!

This product must be used in compliance with local laws and regulations.

Item	Models/variants/notes
Network camera	AXIS 207
	AXIS 207W
	AXIS 207MW
Indoor power supply	AXIS 207: type PS-L
(country specific)	AXIS 207MW/AXIS 207W: type PS-H
Power supply extension	1.8 meters
cable
Camera stand	Supplied with 3 mounting screws. The extension section is ready fitted.
Flexible clamp	For shelf mounting
Terminal block connector	4-pin connector block for connecting external devices to the I/O terminal con-
	nector
Cable clip	Self-adhesive - fixes to back panel for holding power cable
CD	Axis Network Video Product CD, including installation tools and other software,
	product documentation
Printed Materials	AXIS 207/207W/207MW Installation Guide (this document)
	Axis Warranty Document