AXIS 207/207W/207MW Installation Guide | Page 9 |
AXIS IP Utility - single camera/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually set a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment (physical subnet) as the AXIS 207/207W/207MW.
Automatic discovery
1.Check that the AXIS 207/207W/ 207MW is connected to the network and that power has been applied.
2.Start AXIS IP Utility.
3.When the camera appears in the window,
4.See page 12 for instructions on how to set the password.
Set the IP address manually
1.Acquire an unused IP address on the same network segment your computer is connected to.
2.Click the button Set IP address using serial number and enter the serial number and IP address for the AXIS 207/207W/207MW. The serial number is located on the product label.
3.Click the Set IP button and follow the instructions.
4.Click View Home Page button to access the camera’s web pages.
5.See page 12 for instructions on how to set the password.
ENGLISH