Samsung SNC-M300 user manual Setting static ip, Manual Network Setting, Camera list

setting static ip

Manual Network Setting

Run the <IP Installer.exe> program and display the camera list found on the screen. For the initial run, the [Auto Set] and [Manual Set] button are all disabled.

1	Select a camera you want from the	1
	camera list.
	Confirm the MAC Address of the camera
	on its rear panel.
	The [Auto Set] and [Manual Set] button
2	are activated.
	Click the [Manual Set] button.
		2

The Manual Set window appears.

The <IP Address>, <Subnet Mask>, <Gateway> and <HTTP Port> values of the camera are displayed in their default values.

The password is set to “4321” by factory default.

3 Set up the IP related settings in the <ADDRESS>field.

<MAC Address>: The MAC Address

printed on the camera rear penal is 3 automatically displayed. No additional

setting is required.

<If using an IP router>

<IP Address>: Set it according to the private IP address range provided by the IP Router.

ex) 192.168.1.2~254, 192.168.0.2~254, or 192.168.XXX.2~254

<Subnet Mask>: The IP Router’s <Subnet Mask> becomes camera’s <Subnet Mask>value.

<Gateway>: The IP Router’s <LAN IP Address> becomes camera’s <Gateway>value.

<If not using an IP router>

For the <IP Address>, <Gateway> and <Subnet Mask> settings, contact your network administrator.

3

22_ Setting Static IP