Samsung SNC-M300 To view the log information, Click System  LOG, Setting time is applied

Page 50

To setup the system time

1 Select one of the NTP server addresses of the <Address> list, or click <Syncronize with PC Viewer>.

2 Set the date and time directly if you select <Manual>.

3 Click the [Apply] button.

The setting time is applied.

NTP Server IPs are provided by a public agency and their list is therefore subject to change. In a local network, a separate NTP server must be manually defined.

The current time can vary depending on the computers regional (GMT and DST) and country (PC time configuration) settings.

To view the log information

Click <SYSTEM>  <LOG>.

The Log window appears showing log information.

<System Log List>: Shows the log information about the system changes along with time and IP address.

-<User Log In>: Shows current camera login user.

-<Video Configuration Change>: Shows video setting changes.

-<System Time Change>: Shows time changes.

-<System Start>: Shows time when the camera is turned on.

The maximum number of logs that can be recorded is 2,000.

If the number goes over 2,000, new logs are added and the bottom-most logs are deleted.

46_ Setting Up

Image 50

Contents SNC-M300 Safety precautions Page Important safety instructions Contents Setting Up Using the CameraPreparation FeaturesPrecautions Installation and Use Compatible IP Routers Recommended PC SpecificationsCompatible PoE Switches Checking the components in the packageNames of Each Part FrontRear Description Disconnect the power cord before installation or relocation Installation and connectionInstalling the Camera When using the CS lensAdjusting the back focus Case of the lens with no zooming functionInserting/Removing an Sdhc Memory Card Memory Card Information not included What is a memory card?Contacts Lock Switch Selecting a memory card that’s suitable for youConnect the Ethernet cable to the network port as shown ConnectingConnecting Ethernet Cable Connecting Power Alarm In/Out Connection Diagram To connect input and output portsMicrophonePre-Amp Connecting to Audio Input/OutputMicrophone Speaker Pre-AmpAudio I/O Block Diagram Network connection & setup Network Connection & Setup Connecting to the camera from an IP router external PC Setting the IP addressConnecting a local PC in the IP router to the camera Connecting the camera directly to local area networking Connecting to the camera from a local PC in the LANSearching for the camera IP Installer screen layoutIP Installer Camera list Setting static ipManual Network Setting Click the Manual Set buttonTransmission. The default value is 60001TCP PORTfields, set up port numbersEnter your password Camera is set to the manually entered IP and is restartedSet the IP and port settings for camera differently If more than one camera are connected to an IP RouterClick the OK button Automatic Network SettingAutomatic network setting is finished Examples of using Dynamic IP Setting dynamic ipDynamic IP Setting Dynamic IP CheckPort Forwarding Port Mapping Setting Manual Port ForwardingConnecting to the camera 사용using the cameraConnecting to the camera Connecting to the camera using the IP Installer program Checking the Ddns addressClick the Install ActiveX Control Installing ActiveXFor Windows XP Service Pack If the following screen appears, click the Install buttonLogging to the camera Using the Viewer Screen Main Screen LayoutAudio Check the Listen or Speak check box for Audio Print Prints the recorded image on the screenRecord Saves the recorded video as a .avi video file Displays the recorded video on live screenClick OK To Capture a VideoTo Print a Video At a desired scene, click the Print buttonTo Record a Video At desired scene, click Record button Set up the AVI saveInsufficient Disk Space Setting To stop a recording, click Record button once againName Function and Description Date Using the Search Viewer ScreenYou can select the desired time to search the alarm events Thumbnail SizeTo set up the camera Setting upSetting the camera Viewer screen, click the Setup tab Setup window appearsSetup Screen Layout SetupbasicClick Basic  Video & Audio Basic ConfigurationTo setup Video/Audio To Setup IP settings Click Basic  IPTo Setup Users Click Basic  UserClick the Apply button Enter user ID and passwordFor the ID and password, up to User from the Operator and User in the Level fieldClick the Delete button in the User window Window, modify User IDOr Level of the user account Click the Apply button To set the display language Click Basic  LanguageTo set date/time Click System  DATE/TIMEClick System  LOG Setting time is appliedTo view the log information Click System  To update the softwareSoftware Update window appears Reset window appears Restart The Reset window appears To reset the systemClick System  Reset To setup the camera Click System  CameraYou can display text on the screen Layout ConfigurationTo Set text Click Overlay To set the image transmission function Event ConfigurationClick Event  Transfer Setup Click the Test buttonTo setup the record Click Event  Record SetupTo set an alarm image Click Event  Alarm Image Transfer Setup settings To set an alarm inputClick Event  Alarm Input 1 or Alarm Input To set the motion detection function Click Event  MotionSquare box returns to its original color To complete the setting, click the Apply buttonSelected area is colored in yellow To set scheduled transmission Click Event  ScheduleNetwork Configuration To set video streamingTo set Ddns If 00166c, and p ifTroubleshooting 부록appendixCamera Is it possible to configure Enabled Motion DetectionFeature under Motion But didn’t trigger an alarmSpecifications DetailsIP installation function XP, Vista support Alarm Input TransferSetting Firmware upgrade by web browserImage Quality Image size Frame rate Resolution LevelFrame Rate Qxga Mpeg Frame rate fpsFrame Rate Uxga Quality Image size Frame rate108 Quality Image size Frame rate ResolutionLevel Frame Rate Sxga 132 108Jpeg GPL/LGPL Software License Lgpl S/WAppendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Correct Disposal of This Product AB68-00721E00