Samsung SNC-M300 user manual To Setup IP settings, Click Basic  IP

Page 44

To Setup IP settings

1 Click <BASIC>  <IP>.

IP Setting window appears.

2 To complete the setting, click the [Apply] button.

The settings are saved and the system is restarted.

The currently opened web browser is closed.

When two or more cameras are connected to a single IP sharing device, IP-related settings and port-related settings should be configured differently.

<IP Type>: Shows the current camera IP setting type.

- Select the IP setting type from <Static IP> or <Dynamic IP>.

<IP Configuration>: Allows setting the camera and port related settings.

-<MAC Address>: Shows the Ethernet MAC address. Since this value is used to create a DDNS address, confirm the value.

-<IP Address>: Shows the currently configured IP address. If the <IP Type> is set to <Static IP>, you can change the IP address.

-<Subnet Mask>: Shows the <Subnet Mask> for the configured IP address.

-<Gateway>: Shows the <Gateway> address for the configured IP address.

-<DNS Server>: Shows the IP address of the DNS (Domain Name Service) server.

-<HTTP Webserver Port>: Shows the HTTP port used to connect to the camera using the web browser. The default port number is 80(TCP).

-<Device Port(TCP)>: A port used to control video transmission. The default value is 60001(TCP).

-<TCP Streaming Port>: A port used to transfer video using the TCP protocols.

The default value is 60002(TCP).

-<UDP Streaming Port>: A port used to transfer video using the UDP multicast protocols. The default value is 60003(UDP).

-<Upload Port(TCP)>: A port used to upgrade software. Default value is 60004(TCP).

<Multicast Settings>: To transmit a video using UDP Multicast, you can set the IP address, port and TTL.

- <Multicast Address>: Shows IP address set for video transmission using UDP Multicast.

The default value is 225.128.1.128. It is recommended to set it to between

224.0.0.0and 239.255.255.255.

-<Multicast Port>: Shows UDP port set for video transmission using UDP Multicast. The default value is 60005(UDP).

-<TTL>: TTL stands for “Time To Live” that allows you to set the number of routers so that the packet can pass through. Each router decrease the TTL value one by one when a packet passes

it through. If the TTL value reaches 0, the packet cannot pass through a router. The default value is 63. It is recommended to set it to between 0 and 255.

40_ Setting Up

Image 44

Contents SNC-M300 Safety precautions Page Important safety instructions Contents Setting Up Using the CameraPreparation FeaturesPrecautions Installation and Use Recommended PC Specifications Compatible PoE SwitchesCompatible IP Routers Checking the components in the packageNames of Each Part FrontRear Description Installation and connection Installing the CameraDisconnect the power cord before installation or relocation When using the CS lensAdjusting the back focus Case of the lens with no zooming functionInserting/Removing an Sdhc Memory Card What is a memory card? Contacts Lock SwitchMemory Card Information not included Selecting a memory card that’s suitable for youConnect the Ethernet cable to the network port as shown ConnectingConnecting Ethernet Cable Connecting Power Alarm In/Out Connection Diagram To connect input and output portsConnecting to Audio Input/Output MicrophoneMicrophonePre-Amp Speaker Pre-AmpAudio I/O Block Diagram Network connection & setup Network Connection & Setup Connecting to the camera from an IP router external PC Setting the IP addressConnecting a local PC in the IP router to the camera Connecting the camera directly to local area networking Connecting to the camera from a local PC in the LANSearching for the camera IP Installer screen layoutIP Installer Setting static ip Manual Network SettingCamera list Click the Manual Set buttonPORTfields, set up port numbers Enter your passwordTransmission. The default value is 60001TCP Camera is set to the manually entered IP and is restartedSet the IP and port settings for camera differently If more than one camera are connected to an IP RouterClick the OK button Automatic Network SettingAutomatic network setting is finished Setting dynamic ip Dynamic IP SettingExamples of using Dynamic IP Dynamic IP CheckPort Forwarding Port Mapping Setting Manual Port ForwardingConnecting to the camera 사용using the cameraConnecting to the camera Connecting to the camera using the IP Installer program Checking the Ddns addressInstalling ActiveX For Windows XP Service PackClick the Install ActiveX Control If the following screen appears, click the Install buttonLogging to the camera Using the Viewer Screen Main Screen LayoutPrint Prints the recorded image on the screen Record Saves the recorded video as a .avi video fileAudio Check the Listen or Speak check box for Audio Displays the recorded video on live screenTo Capture a Video To Print a VideoClick OK At a desired scene, click the Print buttonAt desired scene, click Record button Set up the AVI save Insufficient Disk Space SettingTo Record a Video To stop a recording, click Record button once againUsing the Search Viewer Screen You can select the desired time to search the alarm eventsName Function and Description Date Thumbnail SizeSetting up Setting the cameraTo set up the camera Viewer screen, click the Setup tab Setup window appearsSetup Screen Layout SetupbasicClick Basic  Video & Audio Basic ConfigurationTo setup Video/Audio To Setup IP settings Click Basic  IPTo Setup Users Click Basic  UserEnter user ID and password For the ID and password, up toClick the Apply button User from the Operator and User in the Level fieldClick the Delete button in the User window Window, modify User IDOr Level of the user account Click the Apply button To set the display language Click Basic  LanguageTo set date/time Click System  DATE/TIMEClick System  LOG Setting time is appliedTo view the log information Click System  To update the softwareSoftware Update window appears Reset window appears Restart The Reset window appears To reset the systemClick System  Reset To setup the camera Click System  CameraLayout Configuration To Set textYou can display text on the screen Click Overlay Event Configuration Click Event  Transfer SetupTo set the image transmission function Click the Test buttonTo setup the record Click Event  Record SetupTo set an alarm image Click Event  Alarm Image Transfer Setup settings To set an alarm inputClick Event  Alarm Input 1 or Alarm Input To set the motion detection function Click Event  MotionSquare box returns to its original color To complete the setting, click the Apply buttonSelected area is colored in yellow To set scheduled transmission Click Event  ScheduleNetwork Configuration To set video streamingTo set Ddns If 00166c, and p ifTroubleshooting 부록appendixEnabled Motion Detection Feature under MotionCamera Is it possible to configure But didn’t trigger an alarmSpecifications DetailsAlarm Input Transfer SettingIP installation function XP, Vista support Firmware upgrade by web browserQuality Image size Frame rate Resolution Level Frame Rate QxgaImage Mpeg Frame rate fpsFrame Rate Uxga Quality Image size Frame rate108 Quality Image size Frame rate ResolutionLevel Frame Rate Sxga 132 108Jpeg GPL/LGPL Software License Lgpl S/WAppendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Correct Disposal of This Product AB68-00721E00