Samsung SNC-M300 user manual Preparation, Features, Precautions Installation and Use

Page 7

preparation

Features

Various Communication Protocol Support

This product supports various communication protocols such as ARP, HTTP and DHCP as well as TCP/IP, UDP, RTP/RTSP, SMTP for Email transmission and FTP protocol.

Monitoring Through Web Browser

Monitoring Through Web Browser This product enables watching a video through an Internet web browser so that you can watch a video through the Internet as you can within the local network.

Automatic Local IP Setting Function

This function offers an easy way of configuring the network settings with a minimal key input for those who are not familiar with it.

Alarm Function

If this product is connected with a motion sensor and the sensor detects a motion, a recorded video clip is sent through the FTP/Email(SMTP) registered by the user or saved on the SDHC memory card and a signal is sent to an alarm output port.

Motion Detection Function

If the user specifies a target area to monitor and the motion sensor detects a motion within that area, a still image is sent to the FTP/Email(SMTP) server designated by the user or saved on the SDHC memory card, and signals are sent to the alarm output terminal.

Precautions – Installation and Use

Do not disassemble your camera.

Always be cautious when handling your camera.

Do not subject the camera to impact or vibration and always be cautious of damaging the camera due to neglectful storage and/or operation.

Do not install the camera at a location where it would become exposed to rain or humidity and do not operate the camera in a wet environment.

Do not clean the camera’s main body using harsh abrasives or similar substances. If dirty, use a dry piece of cloth to clean instead.

Install the camera in a shaded area or environment, protected from direct sunlight. Direct sunlight exposure has a negative effect on the camera.

Do not bend or throw the SDHC memory card.

Do not store or use the SDHC memory card in a hot, humid, or dusty environment.

Protect the contacts of the SDHC memory card from foreign substance buildup.

If foreign substances have been built up on the contacts, remove using a soft piece of cloth.

When removing the SDHC memory card, disable SD Card Recording to protect against data loss (refer to page 53 for instruction on disabling SD Card Recording).

Data cannot be stored on SDHC memory cards whose service life has expired. Please purchase a new SDHC memory card if you experience this.

The manufacturer will not be held responsible for data loss incurred by the customer due to im- proper use.

Using non-recommended PoE device may cause malfunction of either the camera or PoE device itself. (Refer to page 4 for the compatible PoE Switch)

01 PREPARATION

Preparation _03

Image 7
Contents SNC-M300 Safety precautions Page Important safety instructions Contents Using the Camera Setting UpPrecautions Installation and Use FeaturesPreparation Checking the components in the package Recommended PC SpecificationsCompatible PoE Switches Compatible IP RoutersFront Names of Each PartRear Description When using the CS lens Installation and connectionInstalling the Camera Disconnect the power cord before installation or relocationCase of the lens with no zooming function Adjusting the back focusInserting/Removing an Sdhc Memory Card Selecting a memory card that’s suitable for you What is a memory card?Contacts Lock Switch Memory Card Information not includedConnecting Ethernet Cable ConnectingConnect the Ethernet cable to the network port as shown Connecting Power To connect input and output ports Alarm In/Out Connection DiagramSpeaker Pre-Amp Connecting to Audio Input/OutputMicrophone MicrophonePre-AmpAudio I/O Block Diagram Network connection & setup Network Connection & Setup Connecting a local PC in the IP router to the camera Setting the IP addressConnecting to the camera from an IP router external PC Connecting to the camera from a local PC in the LAN Connecting the camera directly to local area networkingIP Installer IP Installer screen layoutSearching for the camera Click the Manual Set button Setting static ipManual Network Setting Camera listCamera is set to the manually entered IP and is restarted PORTfields, set up port numbersEnter your password Transmission. The default value is 60001TCPIf more than one camera are connected to an IP Router Set the IP and port settings for camera differentlyAutomatic network setting is finished Automatic Network SettingClick the OK button Dynamic IP Check Setting dynamic ipDynamic IP Setting Examples of using Dynamic IPManual Port Forwarding Port Forwarding Port Mapping SettingConnecting to the camera 사용using the cameraConnecting to the camera Checking the Ddns address Connecting to the camera using the IP Installer programIf the following screen appears, click the Install button Installing ActiveXFor Windows XP Service Pack Click the Install ActiveX ControlLogging to the camera Main Screen Layout Using the Viewer ScreenDisplays the recorded video on live screen Print Prints the recorded image on the screenRecord Saves the recorded video as a .avi video file Audio Check the Listen or Speak check box for AudioAt a desired scene, click the Print button To Capture a VideoTo Print a Video Click OKTo stop a recording, click Record button once again At desired scene, click Record button Set up the AVI saveInsufficient Disk Space Setting To Record a VideoThumbnail Size Using the Search Viewer ScreenYou can select the desired time to search the alarm events Name Function and Description DateViewer screen, click the Setup tab Setup window appears Setting upSetting the camera To set up the cameraSetupbasic Setup Screen LayoutTo setup Video/Audio Basic ConfigurationClick Basic  Video & Audio Click Basic  IP To Setup IP settingsClick Basic  User To Setup UsersUser from the Operator and User in the Level field Enter user ID and passwordFor the ID and password, up to Click the Apply buttonOr Level of the user account Click the Apply button Window, modify User IDClick the Delete button in the User window Click Basic  Language To set the display languageClick System  DATE/TIME To set date/timeTo view the log information Setting time is appliedClick System  LOG Software Update window appears To update the softwareClick System  Click System  Reset To reset the systemReset window appears Restart The Reset window appears Click System  Camera To setup the cameraClick Overlay  Layout ConfigurationTo Set text You can display text on the screenClick the Test button Event ConfigurationClick Event  Transfer Setup To set the image transmission functionClick Event  Record Setup To setup the recordClick Event  Alarm Image To set an alarm imageClick Event  Alarm Input 1 or Alarm Input To set an alarm input Transfer Setup settings Click Event  Motion To set the motion detection functionSelected area is colored in yellow To complete the setting, click the Apply buttonSquare box returns to its original color Click Event  Schedule To set scheduled transmissionTo set video streaming Network ConfigurationIf 00166c, and p if To set Ddns부록appendix TroubleshootingBut didn’t trigger an alarm Enabled Motion DetectionFeature under Motion Camera Is it possible to configureDetails SpecificationsFirmware upgrade by web browser Alarm Input TransferSetting IP installation function XP, Vista supportMpeg Frame rate fps Quality Image size Frame rate Resolution LevelFrame Rate Qxga ImageQuality Image size Frame rate Frame Rate UxgaLevel Quality Image size Frame rate Resolution108 132 108 Frame Rate SxgaJpeg Lgpl S/W GPL/LGPL Software LicenseAppendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Correct Disposal of This Product AB68-00721E00