Samsung SNC-M300 user manual To setup the record, Click Event  Record Setup

Page 56

<E-mail(SMTP) Transfer> : You can transfer an alarm image through Email. This function supports SMTP Email server only. When the initial SMTP server setting and connection are not verified, the <Not verified> message appears.

-<SMTP Server Address>: Enter the IP address of an SMTP server to be used to send an Email. Example) smtp.hotmail.com

-<User ID>: Enter a user account ID to connect to connect the SMTP server.

-<Password>: Enter a user account password to the SMTP server.

-<E-mail Sender>: Enter the address of the Email sender. If the sender address is incorrect, the Email from the sender may be classified into SPAM mail by the SMTP server and may not be sent.

-<E-mail Receiver>: Enter the address of the Email recipient.

-<Title>: Enter the title of the Email.

-<Message>: Enter the contents of the Email. An alarm image is attached to the Email as an attached file.

To test Email transmission

Click the [Test] button.

Connect to the configured SMTP server and conduct image transmission test automatically.

When the SMTP server connection and transmission tests are complete,

the <Verified> message will be displayed. If the test fails, an error message appears. In this case, check the SMTP server status and the configured settings once again.

To setup the record

1 Click <EVENT>  <RECORD SETUP>.

The RECORD SETUP window appears.

2 To complete the setting, click the [Apply] button.

The settings are saved.

<SD Card>: Enables you to verify data saved on the SDHC memory card and format the memory card itself. It is possible to set to automatically delete movie clips recorded before a certain period of time (e.g. 1 week, 1 month, or 1 year).

<Options>: Determine whether or not you wish to receive Email notification of insufficient capacity warnings.

52_ Setting Up

Image 56

Contents SNC-M300 Safety precautions Page Important safety instructions Contents Setting Up Using the CameraPreparation FeaturesPrecautions Installation and Use Recommended PC Specifications Compatible PoE SwitchesCompatible IP Routers Checking the components in the packageNames of Each Part FrontRear Description Installation and connection Installing the CameraDisconnect the power cord before installation or relocation When using the CS lensAdjusting the back focus Case of the lens with no zooming functionInserting/Removing an Sdhc Memory Card What is a memory card? Contacts Lock SwitchMemory Card Information not included Selecting a memory card that’s suitable for youConnect the Ethernet cable to the network port as shown ConnectingConnecting Ethernet Cable Connecting Power Alarm In/Out Connection Diagram To connect input and output portsConnecting to Audio Input/Output MicrophoneMicrophonePre-Amp Speaker Pre-AmpAudio I/O Block Diagram Network connection & setup Network Connection & Setup Connecting to the camera from an IP router external PC Setting the IP addressConnecting a local PC in the IP router to the camera Connecting the camera directly to local area networking Connecting to the camera from a local PC in the LANSearching for the camera IP Installer screen layoutIP Installer Setting static ip Manual Network SettingCamera list Click the Manual Set buttonPORTfields, set up port numbers Enter your passwordTransmission. The default value is 60001TCP Camera is set to the manually entered IP and is restartedSet the IP and port settings for camera differently If more than one camera are connected to an IP RouterClick the OK button Automatic Network SettingAutomatic network setting is finished Setting dynamic ip Dynamic IP SettingExamples of using Dynamic IP Dynamic IP CheckPort Forwarding Port Mapping Setting Manual Port ForwardingConnecting to the camera 사용using the cameraConnecting to the camera Connecting to the camera using the IP Installer program Checking the Ddns addressInstalling ActiveX For Windows XP Service PackClick the Install ActiveX Control If the following screen appears, click the Install buttonLogging to the camera Using the Viewer Screen Main Screen LayoutPrint Prints the recorded image on the screen Record Saves the recorded video as a .avi video fileAudio Check the Listen or Speak check box for Audio Displays the recorded video on live screenTo Capture a Video To Print a VideoClick OK At a desired scene, click the Print buttonAt desired scene, click Record button Set up the AVI save Insufficient Disk Space SettingTo Record a Video To stop a recording, click Record button once againUsing the Search Viewer Screen You can select the desired time to search the alarm eventsName Function and Description Date Thumbnail SizeSetting up Setting the cameraTo set up the camera Viewer screen, click the Setup tab Setup window appearsSetup Screen Layout SetupbasicClick Basic  Video & Audio Basic ConfigurationTo setup Video/Audio To Setup IP settings Click Basic  IPTo Setup Users Click Basic  UserEnter user ID and password For the ID and password, up toClick the Apply button User from the Operator and User in the Level fieldClick the Delete button in the User window Window, modify User IDOr Level of the user account Click the Apply button To set the display language Click Basic  LanguageTo set date/time Click System  DATE/TIMEClick System  LOG Setting time is appliedTo view the log information Click System  To update the softwareSoftware Update window appears Reset window appears Restart The Reset window appears To reset the systemClick System  Reset To setup the camera Click System  CameraLayout Configuration To Set textYou can display text on the screen Click Overlay Event Configuration Click Event  Transfer SetupTo set the image transmission function Click the Test buttonTo setup the record Click Event  Record SetupTo set an alarm image Click Event  Alarm Image Transfer Setup settings To set an alarm inputClick Event  Alarm Input 1 or Alarm Input To set the motion detection function Click Event  MotionSquare box returns to its original color To complete the setting, click the Apply buttonSelected area is colored in yellow To set scheduled transmission Click Event  ScheduleNetwork Configuration To set video streamingTo set Ddns If 00166c, and p ifTroubleshooting 부록appendixEnabled Motion Detection Feature under MotionCamera Is it possible to configure But didn’t trigger an alarmSpecifications DetailsAlarm Input Transfer SettingIP installation function XP, Vista support Firmware upgrade by web browserQuality Image size Frame rate Resolution Level Frame Rate QxgaImage Mpeg Frame rate fpsFrame Rate Uxga Quality Image size Frame rate108 Quality Image size Frame rate ResolutionLevel Frame Rate Sxga 132 108Jpeg GPL/LGPL Software License Lgpl S/WAppendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Correct Disposal of This Product AB68-00721E00