Samsung SNC-M300 user manual To setup the camera, Click System  Camera

Page 53

To setup the camera

1 Click <SYSTEM>  <CAMERA>.

You can select one from <Image Flip>, <Image>, <White Balance>,

<Exposure Mode>, <Adaptive Lighting Mode>,

<Power Line>, <Saturation> and <Detail>.

2 To complete the setting, click the [Apply] button.

<Image Flip>: Images can be flipped horizontally or vertically.

<Image>: Images can be set to color or black and-white.

<White Balance>: Color casts can be adjusted so that images in white can normally be seen at any color temperature.

<Auto>: The camera can automatically adjust the color temperature in real time according to changes in surroundings. The range of color temperature that can be adjusted is approx. 2000K – 8000K.

<Daylight>: A mode set to a color temperature of 6500K.

<Tungsten>: A mode set to a color temperature of 2800K.

<Office fluorescent>: A mode set to a color temperature of 4000K.

<Fluorescent>: A mode set to a color temperature of 4500K.

<Horizontal>: A mode set to a color temperature of 2000K.

<Exposure Mode>: The level of exposure can be adjusted by selecting Auto or Manual. (Settings: Auto, Manual (0,1,2,3,4))

<Auto>: Supports the optimum exposure level.

<Manual>: A desired exposure level (0 – 4) can be set according to surroundings.

<Adaptive Lighting Mode>: It can improve the lighting effect by increasing the intensity of the light. <Off>: A mode in which the backlight function is turned off.

<Normal>: A mode in which both the dark and bright areas are adjusted according to the surroundings.

<Backlit>: A mode in which the backlight adjustment function is enhanced.

<Power Line>: The power frequency can be set to 50 Hz or 60 Hz.

<Saturation>: The screen image can be adjusted to desired saturation. (Settings: 0,1,2,3,4,5,6,7,8,9)

<Detail>: Horizontal and vertical sharpness can be adjusted. (Settings: 0,1,2,3,4,5,6,7,8,9)

07 SETTING UP

Setting Up _49

Image 53

Contents SNC-M300 Safety precautions Page Important safety instructions Contents Using the Camera Setting UpPreparation FeaturesPrecautions Installation and Use Compatible PoE Switches Recommended PC SpecificationsCompatible IP Routers Checking the components in the packageFront Names of Each PartRear Description Installing the Camera Installation and connectionDisconnect the power cord before installation or relocation When using the CS lensCase of the lens with no zooming function Adjusting the back focusInserting/Removing an Sdhc Memory Card Contacts Lock Switch What is a memory card?Memory Card Information not included Selecting a memory card that’s suitable for youConnect the Ethernet cable to the network port as shown ConnectingConnecting Ethernet Cable Connecting Power To connect input and output ports Alarm In/Out Connection DiagramMicrophone Connecting to Audio Input/OutputMicrophonePre-Amp Speaker Pre-AmpAudio I/O Block Diagram Network connection & setup Network Connection & Setup Connecting to the camera from an IP router external PC Setting the IP addressConnecting a local PC in the IP router to the camera Connecting to the camera from a local PC in the LAN Connecting the camera directly to local area networkingSearching for the camera IP Installer screen layoutIP Installer Manual Network Setting Setting static ipCamera list Click the Manual Set buttonEnter your password PORTfields, set up port numbersTransmission. The default value is 60001TCP Camera is set to the manually entered IP and is restartedIf more than one camera are connected to an IP Router Set the IP and port settings for camera differentlyClick the OK button Automatic Network SettingAutomatic network setting is finished Dynamic IP Setting Setting dynamic ipExamples of using Dynamic IP Dynamic IP CheckManual Port Forwarding Port Forwarding Port Mapping SettingConnecting to the camera 사용using the cameraConnecting to the camera Checking the Ddns address Connecting to the camera using the IP Installer programFor Windows XP Service Pack Installing ActiveXClick the Install ActiveX Control If the following screen appears, click the Install buttonLogging to the camera Main Screen Layout Using the Viewer ScreenRecord Saves the recorded video as a .avi video file Print Prints the recorded image on the screenAudio Check the Listen or Speak check box for Audio Displays the recorded video on live screenTo Print a Video To Capture a VideoClick OK At a desired scene, click the Print buttonInsufficient Disk Space Setting At desired scene, click Record button Set up the AVI saveTo Record a Video To stop a recording, click Record button once againYou can select the desired time to search the alarm events Using the Search Viewer ScreenName Function and Description Date Thumbnail SizeSetting the camera Setting upTo set up the camera Viewer screen, click the Setup tab Setup window appearsSetupbasic Setup Screen LayoutClick Basic  Video & Audio Basic ConfigurationTo setup Video/Audio Click Basic  IP To Setup IP settingsClick Basic  User To Setup UsersFor the ID and password, up to Enter user ID and passwordClick the Apply button User from the Operator and User in the Level fieldClick the Delete button in the User window Window, modify User IDOr Level of the user account Click the Apply button Click Basic  Language To set the display languageClick System  DATE/TIME To set date/timeClick System  LOG Setting time is appliedTo view the log information Click System  To update the softwareSoftware Update window appears Reset window appears Restart The Reset window appears To reset the systemClick System  Reset Click System  Camera To setup the cameraTo Set text Layout ConfigurationYou can display text on the screen Click Overlay Click Event  Transfer Setup Event ConfigurationTo set the image transmission function Click the Test buttonClick Event  Record Setup To setup the recordClick Event  Alarm Image To set an alarm image Transfer Setup settings To set an alarm inputClick Event  Alarm Input 1 or Alarm Input Click Event  Motion To set the motion detection functionSquare box returns to its original color To complete the setting, click the Apply buttonSelected area is colored in yellow Click Event  Schedule To set scheduled transmissionTo set video streaming Network ConfigurationIf 00166c, and p if To set Ddns부록appendix TroubleshootingFeature under Motion Enabled Motion DetectionCamera Is it possible to configure But didn’t trigger an alarmDetails SpecificationsSetting Alarm Input TransferIP installation function XP, Vista support Firmware upgrade by web browserFrame Rate Qxga Quality Image size Frame rate Resolution LevelImage Mpeg Frame rate fpsQuality Image size Frame rate Frame Rate Uxga108 Quality Image size Frame rate ResolutionLevel 132 108 Frame Rate SxgaJpeg Lgpl S/W GPL/LGPL Software LicenseAppendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Appendix Correct Disposal of This Product AB68-00721E00