Moxa Technologies 2310 Download Event-triggered Snapshots, Customizing Homepage Graphics

Page 57

VPort 2310 User’s Manual

Advanced Applications

Download Event-triggered Snapshots

There are three video image files for the video channel of three stages: pre-alarm, the moment when triggered, and post-alarm. Only the snapshots captured by the last event are preserved. Administrator and users can use FTP or URL to get the saved snapshots. They can also be browsed from the application page under system configuration.

Getting triggered snapshots via URL

/cgi-bin/snapshot.jpg?file=<value>

Video channel	Value
Snapshot stage

snapshot before event	Pre

snapshot upon event	trg

snapshot after event	pos

Getting triggered snapshots via FTP

File name	Pre-alarm	Upon alarm	Post-alarm
Video	vpre.jpg	vtrg.jpg	vpos.jpg

Customizing Homepage Graphics

The small icon before each link can be changed by the Administrator. There are three types of logos and backgrounds: blank, default, and other URL. The default method will use the image stored in the Flash memory. The administrator may change the default logo, background image, and button images by uploading customized ones. The following table shows the referenced file names and size limitations.

Object	File name	Maximal size
Logo	logo.gif	Logo and background share 8000 bytes
Background	back.gif	Logo and background share 8000 bytes
Link icon	btn_text.gif	2000 bytes

Usage via FTP is illustrated below.

5-3

Image 57

Contents First Edition, January Moxa VPort 2310 Video Server User’s ManualCopyright Notice VPort 2310 User’s ManualTrademarks DisclaimerImportant Note Before getting startedTable of Contents Chapter Upgrading System Firmware Page Introduction Overview Package Checklist Product FeaturesTechnical support for developers Product Description Typical ApplicationFront Panel BNC video inputNetwork and Status LEDs Rear Panel10/100 Mbps Ethernet port RS-232 COM portDI+ General I/O terminal blockVDC Power Adaptor Reset ButtonGetting Started Before Getting Started Hardware InstallationAssigning an IP Address Dhcp Server EnvironmentUsing IP Reporter Non-DHCP Server Environment Assigning the IP Address Manually Mounting VPortPanel Mounting DIN-Rail MountingFunctions Featured NPort’s Homepage Accessing VPort 2310 for the First TimeAccessing VPort AuthenticationOpening Your Browser Installing the Plug-in Application Functions Featured on VPort’s Homepage Client Settings Custom PTZ Camera CommandsRelay Output Control Motorized PTZ Camera ControlPage System Configuration Via Web Access System ConfigurationSystem Configuration Via Web Access SystemHost name Date and Time Security Root passwordAdd user Manage user$ Reset network at next boot Reset network at next bootReset network at next boot NetworkSmtp GeneralSave the modification Audio ControlChannel port Improve audio quality in a low bandwidth environmentCheckmark Enable Ddns Ddns & UPnPDynamic DNS Universal PnP VideoText on Video ColorModulation SizeMaximum Frame Rate Video Quality ControlImage Setting Enable Motion DetectionSave the settings Flip and MirrorHow to Set up a VMD condition Enable Motion Detection boxMotion Detection VPort 2310 User’s Manual System Configuration Application Step Setup the General Step Event operation Sequential modeSetup the Trigger Condition Setup the Trigger actionEvent operation Weekly scheduleTrigger output alarm Sequential ModeCamera Control Send Snapshot by Email or FTPPreset Position Interface modeBaud rate bps Select Camera driverCustom commands Focus Focus near, Focus Far actions Custom Camera SettingsLogo figure Homepage LayoutLogo link Background graphView parameters View log fileFactory default System Configuration Via FTPFrom 12 to -12, GMT + Value Video Server Initial Configuration fileCurrent Language, read-only Or 1024 to VPort 2310 User’s Manual System Configuration Values64k, 128k, 256k, 384k, 512k, 768k 1000k, 1200k System Configuration Via Telnet Telnet CommandsSystem core debugging Reset network Skip installation at next bootRestore factory default settings Reset systemAdvanced Applications URL Commands for System MaintenanceCapturing Up-to-date Still Images This problemVideo Embedded in Customers’ Homepage Getting snapshot via URLCustomizing Homepage Graphics Download Event-triggered SnapshotsGetting triggered snapshots via URL Getting triggered snapshots via FTPDrive digital outputs URL Commands for DI/DO & Camera’s Actions SettingMoving motorized camera in PTZ direction Recalling camera positionSending commands to devices attached to the COM port URL Commands for System MaintenanceRestore Factory Default Settings via URL Download System Log via FTPUpgrading System Firmware Using Upgrade Wizard to Upgrade Firmware VPort 2310 User’s Manual Upgrading System Firmware Using FTP to Upgrade FirmwareTroubleshooting Power On Self Test Post Frequently Asked QuestionsLED pattern after Post Failed function Troubleshooting VPort 2310 User’s Manual Troubleshooting VPort 2310 User’s Manual Troubleshooting Homepage name Referenced URL URL Commands of Video ServerName Value Description Resource name Reference URLNetwork configuration URL Video configuration URL Image quality configuration URL Custom camera configuration URL Homepage layout configuration URL Camera model Baud rate Data bits Stop bit Parity bit Settings of Supported PTZ CamerasCamera Control Cable Time Zone Table VPort 2310 User’s Manual Time Zone Table Technology Technical SpecificationsNetwork Serial PortWarranty Power RequirementsAlarm Features Remote Firmware UpgradeService Information Following services are provided Moxa Internet ServicesMoxa Product & VPort Serial Number Problem Report FormProduct Return Procedure