VPort 2310 User’s ManualURL Commands of Video Server
Custom camera configuration URL
URL: | /setup/custom.cgi |
| |
|
|
|
|
Name |
| Value | Description |
baud |
| <integer> | set baud rate of COM |
data |
| <integer> | set data bits of COM |
stop |
| 1 | set 1 stop bit of COM |
|
| 2 <other than 1> | set 2 stop bits of COM |
parity |
| None | set parity check of COM to none |
|
| Odd | set parity check of COM to odd |
|
| Even | set parity check of COM to even |
up |
| <text string shorter than 80 characters> | tilt up command string of COM |
down |
| <text string shorter than 80 characters> | tilt down command string of COM |
left |
| <text string shorter than 80 characters> | pan left command string of COM |
right |
| <text string shorter than 80 characters> | pan right command string of COM |
home |
| <text string shorter than 80 characters> | home command string of COM |
tele |
| <text string shorter than 80 characters> | zoom in command string of COM |
wide |
| <text string shorter than 80 characters> | zoom out command string of COM |
Application configuration URL
URL: /setup/app.cgi
Name | Value | Description |
emode | <not required> | event mode application |
smode | <not required> | sequential mode application |
smethod | upload snapshots by email | |
| ftp | upload snapshots by FTP |
suffix | <not required> | FTP file with date and time suffix |
delay | <integer> | seconds delay to detect next event |
inter | <integer> | seconds delay to capture |
dihigh | < not required > | set DI high as trigger condition |
dilow | < not required > | set DI low as trigger condition |
dirise | < not required > | set DI rising as trigger condition |
difall | < not required > | set DI falling as trigger condition |
motion1 | < not required > | set motion window1 as trigger condition |
motion2 | < not required > | set motion window2 as trigger condition |
motion3 | < not required > | set motion window3 as trigger condition |
ioalarm | < not required > | trigger DO when DI condition matched |
mdalarm | < not required > | trigger DO when motion detected |
ioupload | < not required > | upload snapshot when DI condition matched |
mdupload | < not required > | upload snapshot when motion detected |
sinter | <integer> | seconds interval for sequential mode |
sbegin | <hh:mm:ss> | time to start sequential mode |
send | <hh:mm:ss> | time to stop sequential mode |