Moxa Technologies 2310 URL Commands for DI/DO & Camera’s Actions Setting, Drive digital outputs

VPort 2310 User’s Manual Advanced Applications

URL Commands for DI/DO & Camera’s Actions Setting

Query status of digital inputs

/setup/getdi.cgi

Video Server will return status of four digital inputs in one line.

Drive digital outputs

/setup/setdo.cgi?do=<state>

Where state is H, L. H means NC connected with COMMON and L means NO connected with

COMMON.

For example, http://192.168.0.201/setup/setdo.cgi?do=h will command the Video Server, with IP address of 192.168.0.201, to set digital output to connect to NC with COMMON.

Moving motorized camera in PTZ direction

<Direction>:	up, left, right, down, home
<Vision>:	wide, tele, near, far, auto
<Command>:	1, 2, 3, 4, 5

/cgi-bin/camctrl.cgi?Move=<direction>&zoom=<vision>&cust=<command>

Param	Value	Description
move	up	Tilt up
	down	Tilt down
	left	Pan left
	right	Pan right
	home	Return to home position
zoom	wide	Zoom in
	tele	Zoom out
focus	near	Focus near
	far	Focus far
	auto	Automatic focus
panspeed	-5 to 5
tiltspeed	-5 to 5

Recalling camera position

/cgi-bin/recall.cgi?recall=<position>

<position>: the text string of a location that is preset in system configuration. Refer to Camera preset configuration URL for preset function.

Transparent Remote Serial Driver

Video Server provides highly customized control support for third-party serial interface devices (other than PTZ cameras). This means that in addition to setting up a custom camera with PAN/ TILT/ ZOOM/ FOCUS commands, users may utilize this mode and introduce a customized homepage to transmit arbitrary user-defined commands from user-side to Video Server. The third-party device connected to the serial port of Video Server will receive the same command sent by the originator. The user only needs to attach the command in ASCII format after the special URL. The Video Server will parse the commands and translate into binary code to send out.

5-4