Coustic D-block manual Features, Specifications

Page 3

FEATURES

•Patented, state-of-the-art power supply

•Patent-pending, D-Block Class D technology for high efﬁciency and interference-free operation

•High mass extruded aluminum heatsink for maximum thermal management and bulletproof reliability

•Adjustable LP Crossover - Variable from 40Hz-200Hz for maximum system design ﬂexibility

•Fully adjustable Bass Boost - 40Hz, 0-18dB to enhance the low frequency experience in your vehicle

•Remote Subwoofer Level Control included allows you to ﬁne tune the bass from the driver’s position

•Defeatable Subsonic Filter at 30 Hz for improved efﬁciency and sonic performance

•High Level Input with patented Intelli-Sense™ auto turn-on for easy installation with factory radios

•CEA 2006 Compliant. All power ratings are not created equal. CEA 2006 Compliance ensures

that the power of this ampliﬁer is measured according to strict standards dictated by the Consumer Electronics Association.

SPECIFICATIONS

		AMP600DB	AMP800DB	AMP1200DB	AMP1600DB

	RMS per channel @	150 Watts	200 Watts	300 Watts	400 Watts
	4Ω (≤ 1% THD+N)	150 Watts	200 Watts	300 Watts	400 Watts
	4Ω (≤ 1% THD+N)

	RMS per channel @	300 Watts	400 Watts	600 Watts	800 Watts
	2Ω (≤ 1% THD+N)	300 Watts	400 Watts	600 Watts	800 Watts
	2Ω (≤ 1% THD+N)

	Signal to Noise Ratio	75 dBA	75 dBA	75 dBA	75 dBA

	Frequency Response	20Hz to 200Hz (-3dB)	20Hz to 200Hz (-3dB)	20Hz to 200Hz (-3dB)	20Hz to 200Hz (-3dB)

	Maximum Input Signal	5V	5V	5V	5V

	Maximum Sensitivity	100mV	100mV	100mV	100mV

	THD+N	<0.25% (reference:1W	<0.25% (reference:1W	<0.25% (reference:1W	<0.25% (reference:1W
	(Distortion)	output)	output)	output)	output)

2

Image 3

Contents Page Introduction Specifications FeaturesConnect the ampliﬁer ground to the vehicle chassis InstallationConnect the ampliﬁer to the battery Connect the ampliﬁer remote turn-onConnecting signal cables to the ampliﬁer Reconnect the battery ground to the vehicle batteryRemote Gain Control Wiring Diagram Charging System Wiring Diagram 5.1 Surround Sound Example Wiring Diagram Single 4-CHANNEL Amplifier System Wiring Diagram Multi Amplifier System System Tuning Input Gain Adjustment Subsonic Filter SUB Sonic System Tuning Crossover AdjustmentCrossover Frequency Selection Freq Bass Boost Control Bass BoostTrouble Shooting Limited Warranty Características InstalaciónConecte el ampliﬁcador a la batería Conexión de los cables de señal al ampliﬁcador Conecte el encendido a control remoto al ampliﬁcadorNota Control remoto de ampliﬁcaciónSintonización DEL Sistema Ajuste DE Amplificación DE Entrada Filtro subsónico SUB Sonic Sintonización DEL SistemaSelección de la frecuencia de crossover Freq Control de refuerzo de bajos Bass BoostResolucion DE Problemas Sonido bajo de la radio y el CD Branchez l’ampliﬁcateur sur la batterie CaractéristiquesBranchez la mise en marche à distance de l’ampliﬁcateur Régulation de gain à distanceBranchez les câbles de signaux sur l’ampliﬁcateur Réglage DU Système Réglage DU Gain D’ENTRÉE Filtre subsonique SUB Sonic Réglage DU Système Réglage DE Filtre PassifSélection de fréquence de ﬁltre passif Freq Réglage des Bass Boost Bass BoostRecherche DES Causes DE Pannes Page Schließen Sie den Verstärker an die Batterie an FeauturesSchließen Sie das Signalkabel an den Verstärker an Schließen Sie den Verstärker an die Fernbedienung anFernbedienungs-Verstärkungsregler Systemeinstellung Anpassung DES Eingangsvertsärkungsreglers Subsonic-Filter SUB Sonic Systemeinstellung CROSSOVER-ANPASSUNGAuswahl der Crossover-Frequenz Freq Bass-Boost-Regler Bass BoostProblemlösungen