Coustic D-block manual System Tuning Crossover Adjustment, Crossover Frequency Selection Freq

Page 11

SYSTEM TUNING (CROSSOVER ADJUSTMENT)

Note: If you are using the Remote Gain, make sure to take this into account during set-up procedures of the subwoofer amplifier. You should set the system up with the Remote Gain plugged in, and with the level knob turned all the way down (counter-clockwise).

Crossover Frequency Selection (FREQ)

The built-in low-pass crossover offers continuously adjustable crossover frequencies between 40 and 200Hz. Adjust the setting according to your speaker component specification or to your particular prefer- ence.

Bass Boost Control (BASS BOOST)

Select a boost level between 0dB and +18dB @ 40Hz to enhance the bass performance for your sound system. BASS BOOST is NOT free! Every 3dB of boost costs you twice as much in power. Make

sure to set the final gains after setting the Bass Boost to work best with your subwoofer/enclosure combination. More is NOT always better!

Subsonic Filter (SUB SONIC)

The fixed 30Hz sub sonic filter can be set on/off. When enabled, the integrated sub sonic filter creates cleaner and tighter bass reproduction by protecting the power amp and speaker from harmful ultra-low frequencies. We recommend enabling this item at all times.

10

Image 11
Contents Page Introduction Specifications FeaturesConnect the amplifier ground to the vehicle chassis InstallationConnect the amplifier to the battery Connect the amplifier remote turn-onRemote Gain Control Connecting signal cables to the amplifierReconnect the battery ground to the vehicle battery Wiring Diagram Charging System Wiring Diagram 5.1 Surround Sound Example Wiring Diagram Single 4-CHANNEL Amplifier System Wiring Diagram Multi Amplifier System System Tuning Input Gain Adjustment Subsonic Filter SUB Sonic System Tuning Crossover AdjustmentCrossover Frequency Selection Freq Bass Boost Control Bass BoostTrouble Shooting Limited Warranty Conecte el amplificador a la batería CaracterísticasInstalación Conexión de los cables de señal al amplificador Conecte el encendido a control remoto al amplificadorNota Control remoto de amplificaciónSintonización DEL Sistema Ajuste DE Amplificación DE Entrada Filtro subsónico SUB Sonic Sintonización DEL SistemaSelección de la frecuencia de crossover Freq Control de refuerzo de bajos Bass BoostResolucion DE Problemas Sonido bajo de la radio y el CD Branchez l’amplificateur sur la batterie CaractéristiquesBranchez les câbles de signaux sur l’amplificateur Branchez la mise en marche à distance de l’amplificateurRégulation de gain à distance Réglage DU Système Réglage DU Gain D’ENTRÉE Filtre subsonique SUB Sonic Réglage DU Système Réglage DE Filtre PassifSélection de fréquence de filtre passif Freq Réglage des Bass Boost Bass BoostRecherche DES Causes DE Pannes Page Schließen Sie den Verstärker an die Batterie an FeauturesFernbedienungs-Verstärkungsregler Schließen Sie das Signalkabel an den Verstärker anSchließen Sie den Verstärker an die Fernbedienung an Systemeinstellung Anpassung DES Eingangsvertsärkungsreglers Subsonic-Filter SUB Sonic Systemeinstellung CROSSOVER-ANPASSUNGAuswahl der Crossover-Frequenz Freq Bass-Boost-Regler Bass BoostProblemlösungen