CA 160 Installation Instructions
PROFESSIONAL INSTALLATION STRONGLY RECOMMENDED
Installation Precautions:
Roll down window to avoid locking keys in vehicle during installation
Avoid mounting components or routing wires near hot surfaces
Avoid mounting components or routing wires near moving parts
Tape or loom wires under hood for protection and appearance
Use grommets when routing wires through metal surfaces
Use a Digital Multi Meter for testing and verifying circuits. DO NOT USE A TEST LIGHT, OR "COMPUTER SAFE PROBE" as these can set off air bags or damage vehicle computers.
Technical Support
For Authorized Dealers - (800) 421-3209
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules and with
Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including any interference that may cause undesired operation.
Warning! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.