Jensen HD5313IR operation manual Preset Stations, Scan, Broadcast Information, ITunes Tagging

HD5313

Preset Stations

Six numbered preset buttons store and recall stations for each band.

Store a Station

Select a band (if needed), then select a station. Hold a preset button (13-18) for three seconds. The preset number will appear in the display.

HD5313

PRESS AND HOLD

PRESET NUMBER APPEARS

NOTE: HD Radio multicast channels can be stored as preset stations.

Recall a Station

Select a band (if needed). Press a preset button (13-18) to select the corresponding stored station.

Scan

Press the SCAN button (21) to scan the current AM or FM band. The unit will pause for 5 seconds at each station. Press the SCAN button again to stop scanning when the desired station is reached.

Broadcast Information

During HD Radio broadcasting, available broadcast information will automatically appear on the LCD. Press the DISP button (7) multiple times to view broadcast information in the following order:

•Band/Frequency

•Station Call Letters

•Song

•Artist

•RDS Category

The information will scroll across the screen if longer than 8 characters.

NOTE: The amount of information displayed when receiving an HD Radio signal is dependent upon what is being broadcast. Some stations broadcast their call letters (name), the artist's name, song title, and category of music.

iTunes® Tagging

The HD5313 offers iTunes® Tagging, which allows the user to "Tag" songs playing on HD Radio™ stations for purchase later through iTunes. When the TAG button (23) is pressed, the unit stores the title and artist song information that can then be transferred to your iPod when connected to the USB connector. A list titled "Tagged" will appear in iTunes, allowing you the option to purchase your tagged songs.

iPod Compatibility

Models supported, but not limited to, include the following

•iPod Nano 4G

•iPod Classic

•iPod Touch

•iPod Nano 3G

Tagging Music

To begin tagging music, tune to an HD Radio station. The “TAG” icon must be illuminated, indicating a digital station is being received. Press the TAG button. The song information is saved to the head unit memory until an iPod is connected. When the tag is successful, the screen displays “TAG SENT”. You can tag up to 50 songs before the tags must be transferred to an iPod or deleted. When the Tag memory reaches capacity (50 tags) the screen displays “STORED FULL”.

	Table 1: TAG Messages
Tag Message		Reason
TAG NOT AVAILABLE		Make sure HD Radio signal is being received.
ALREADY STORED		Song has already been tagged. You cannot save
		the same song twice unless you tag it on a differ-
		ent station.
IPOD ERR		iPod error. Check iPod.
TRANSFER FAILED		Error sending tags to the iPod. Make sure iPod is
		powered on and reconnect until “TAG SENT” is
		displayed.

6