IPod Operation, Accessing iPod Mode, Play/Pause

Jensen HD5313IR IPod Operation, Accessing iPod Mode, Turning the iPod On/Off, Play/Pause

HD5313

iPod Operation

Accessing iPod Mode

This unit is equipped with an iPod ready function that will allow you to control your iPod (if compatible) using the front panel control buttons. The following iPod versions are supported:

•iPod Nano 4G

•iPod Classic

•iPod Touch

•iPod Nano 3G

NOTE: Use the Apple 30-pin iPod to USB cable that came with your iPod to connect the iPod to the USB connector.

The unit will automatically switch to iPod mode when an iPod is plugged into the USB connector. To return to the iPod menu from any other source menu, press the SRC button (2) on the front panel until “IPOD” appears on the display.

NOTE: The HD5313 will not select video files regardless of whether or not a video file was the last file playing when the iPod was plugged into the radio. Only music files are supported.

HD5313

Turning the iPod On/Off

The iPod power turns on automatically when the iPod is connected to the 30-pin iPod cable, as long as the automobile ignition is turned on. You can turn the iPod off by disconnecting it from the cable or by turning the ignition

off. When the ignition is turned off, the iPod will pause and then enter sleep mode after 2 minutes.

NOTE: When connected, the iPod will continuously recharge when the unit is in iPod mode, as long as the vehicle ignition is turned on.

Display Information

iPod song information, when available, appears on the LCD screen automatically during playback. Press the DISP button (7) to manually display iPod playback information in the following order:

•Track/Elapsed Time

•Clock

•Song TITLE

•ARTIST

•CATEGORY (Album Name)

Play/Pause

Press the 1/>/ button (13) to suspend or resume play. “PAUSE” flashes on the display when paused.

Track Selection

Select a Track

Press the >> (10) or << (11) for less than 1 second to advance to the next song in the current category. When a song has been playing for at least one second, press the << (11) to replay the song from the beginning. When a song has been playing for more than one second, you must press << twice to move to the previous file.

Fast Forward / Fast Reverse

Press and hold the >> (10) or << (11) for more than 1 second to fast forward or fast reverse. Playback begins when the button is released.

Repeat (RPT)

Press the RPT button (15) once during disc play to select “REPEAT SONG” and continuously repeat the selected song.

Press RPT twice to select “RPT ALBM” and continuously repeat the entire album/folder.

Press RPT a third time to select “RPT OFF” and stop the repeat function.