HD5313
Tuner Operation
Press the SRC button (2) to switch to HD RADIO mode.
About HD Radio™ Technology
HD Radio technology allows
Select a Band
Press the BAND button (3) to change between three FM bands and two AM band. Each band stores up to six preset stations.
1 | 4 | 7 | 11 | 10 | 20 | 21 | 19 | 5 | 8 | 9 |
HD5313
3 | 6 | 23 | 2 | 13 | 14 | 15 | 16 | 17 | 18 | 12 | 22 |
Tuning
When tuning to an HD Radio channel, “LINKING” may appear on the LCD while the initial digital information is received. Once linked, “Hd1” appears in the bottom center of the LCD.
NOTE: Not all FM or AM stations offer HD Radio (digital) broadcasting. You will receive both analog and digital stations with the HD5313.
Manual Tuning
Press the >> (10) or << (11) button for more than three seconds to enter manual tuning mode, then press the >> or << buttons to move the radio frequency number up or down one step.
Auto Seek Tuning
Press the >> (10) or << (11) button to automatically seek the next station.
HD Radio Multicast Channels
To tune to an HD Radio multicast channel, tune to the main signal and then press the PGM button (19). If a subchannel is available, the corresponding multicasting number appears in the bottom left corner of the LCD.
Analog/Digital Reception
Press and hold the PGM button to change between "Auto", "Digital" and "Analog". When set to “AUTO”, the station will first be received in Analog but will change to Digital when a digital signal is detected and the HD icon will illuminate. If the digital signal becomes unavailable, the unit will revert to Analog reception. In “Auto” or “Digital” mode, the HD icon flashes until a digital signal is received, and remains lit during digital HD Radio reception.
NOTE: Digital signals are not as strong as traditional analog signals. When tuned to a digital HD Radio station, the signal may begin to fade in rural areas. In this case, switching to analog tuning will eliminate signal fading issues. However, you will not receive digital or HD Radio Multicast stations in analog mode.
5