Tuner Operation

VM9311TS

Tuner TFT Display

17	6	4	1	10	2	5	3
				P1
				PRESETS
	11	12		13	14	15	16
						BAND	AS
Source:
	7					8	9

1.	Current Radio Band Indicator
2.	Radio Frequency Indicator
3.	Clock
4.	Stereo Broadcasting Indicator
5.	Strong Local Signal Broadcasting Indicator
6.	Preset Radio Stations: Touch to recall preset stations or
	touch and hold to store a station
7.	Playing Mode
8.	User Defined Equalizer Level
9.	Loud Setting Indicator
10.	Current Preset Station Indicator
11.	<<: Touch to seek backward
12.	>>: Touch to seek forward
13.	<<: Touch to tune backward one step
14.	>>: Touch to tune forward one step
15.	BAND: Touch to change between AM/FM bands

change between the following bands: FM1, FM2, FM3, AM1, and AM2.

Seek Tuning

Press the >> button (19) on remote control or the > button on the joystick (17) to seek the next station higher.

Press the << button (17) on the remote control or the < button on the joystick (16) to seek the next station lower.

Manual Tuning

Press the /\ or V buttons (18, 19) on the joystick to increase or decrease the tuning frequency one step.

Using Preset Stations

Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen.

Storing a Station

1.Select a band (if needed), then select a station.

2.Touch and hold an on-screen preset button (6) for three seconds. The preset number appears at the top of the screen.

Recalling a Station

1.Select a band (if needed).

2.Touch an on-screen preset button (6) to select the corresponding stored station.

NOTE: You can also use the numered buttons on the control panel to store and recall preset stations.

Preview Scan

Scan the AM or FM band for a preview of available stations in your particular area. Press the play/pause button on the remote control once (short press) or push in on the joystick once (short press). Press again to stop preview scan.

Local Radio Station Seeking (LOC)

When the Local function is on, only radio stations with a strong radio signal are played. To activate the Local function in AM/FM tuner mode, press and hold the VOL/LO/DX knob

(6)on the front panel while the yellow volume bar IS NOT visible. Press VOL/LO/DX again to turn Local off. When the Local function is active, “LOC” appears on the screen and a green indicator is illuminated.

16.	AS: Touch to automatically store stations
17.	Touch this area to return to the MAIN MENU

Switch to Radio Tuner source

Press the SRC button (15) on the front panel or remote control (8) to switch to the TUNER source.

Select FM/AM Band

Touch the BAND button (15) on the screen, or press the BAND button on the unit (14) or remote control (20) to

Auto Store (AS)/Preview Scan

Automatic Storing of Preset Stations

To select six strong stations and store them in the current band:

1.Select a band (if needed).

2.Press the AS button (26) on the control panel or touch AS (16) on screen for 2 seconds to activate the Auto Store function.

The new stations replace stations already stored in that band.