VM9311
CONTROLS AND INDICATORS
Button Operation
1. OPEN
Press the OPEN button (1) to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT.
2. WIDE/PICTURE
Press the WIDE/PICTURE button (2) to adjust the display aspect of the picture to one of three settings: Cinema, Full or Normal. Press and hold to access picture settings.
3. (
)
Press the 
button (3) to adjust the upward tilt angle of the screen one step at a time. Press and hold this button to continuously adjust the upward tilt or picture settings.
4. (
)
Press the 
button (4) to adjust the downward tilt angle of the screen one step at a time. Press and hold this button to continuously adjust the downward tilt or picture settings.
5. DISP
Press the DISP button (5) to display system information on the screen.
6. VOL/LOC/DX
Rotate the VOL/LOC/DX knob (6) to adjust the volume.
Press and release to enter and/or confirm audio settings.
Press and hold to activate the Local (LOC) setting.
7. POWER/MUTE
Press the POWER/MUTE button (7) once to turn the unit on. Press again to mute the volume. Press and hold to turn the unit off.
NOTE: The VM9311 features Softmute, which will allow the volume to increase or decrease gradually when the MUTE function is activated or deactivated.
8. 1/AUDIO
DVD Mode: Press to select audio language during playback.
TUNER Mode: Press once to play preset radio station channel 1. Press and hold to store the current radio station in preset channel 1.
9. 2/SUBTITLE
DVD Mode: Press once to select the subtitle language during playback.
TUNER Mode: Press once to play preset radio station channel 2. Press and hold to store the current radio station in preset channel 2.
6