Jensen VM9311 ASP Audio Sound Processing Config Menu, Exiting the System Setup Menu

Adjusting the Clock

Method 1 – TFT screen open:

1.Access the “Clock” setting under the General Setup menu.

2.Press the >> or << buttons (14, 22) on the remote control or the /\ or V buttons (18, 19) on the joystick to move the cursor to the “Hour” or “Min” position.

3.Press the <<, or >> buttons (17, 19) on the remote control or the < or > buttons (16, 17) on the joystick to adjust the hour or minutes.

4.Press the << button (14) on the remote control to confirm setup.

Method 2 – TFT screen closed:

1.Press and hold the DISP button (5) until the clock flashes in the LCD display.

1.Press the /\ or V buttons (18, 19) on the joystick to move the cursor to the “Hour” or “Min” position.

2.Press the < or > buttons (16, 17) on the joystick to adjust the hour or minutes.

3.Press the DISP button (5) on the unit to confirm setup.

Returning to the System Setup Menu

To return to the System Setup menu, move to , then press the >/ button on the remote control.

ASP (Audio Sound Processing) Config Menu

The ASP Config Menu allows you to make fine audio adjustments.

Accessing the ASP Config Menu

To access the “ASP CONFIG” Menu, press the direction buttons on the joystick (16, 17, 18, 19) or remote control (14, 17, 18, 19, 22) to highlight “ASP CONFIG” in green. Press the >/ button (18) on the remote control to enter the “ASP CONFIG” menu. A menu appears with the option for the first item, “Bass Center Freq”, highlighted in light blue.

Adjusting a Feature

1.Enter the option field for the feature you want to adjust by pressing the >/ button (18) on the remote or by pressing the ENTER (joystick) button (20) on the unit. A submenu appears in a second row with the selected option highlighted in light blue.

2.Select a new value by pressing the >> or << buttons (14, 22) on the remote control or the /\ or V buttons (18, 19) on the joystick.

3.Confirm your selection by pressing the <<, <<, or >> buttons (14, 17, 19) on the remote control, or the < or > button (16, 17) on the joystick. The new value is highlighted in light blue and setup is complete.

Table 6: ASP Config Menu Features

Setting	Options	Function
Bass Center	60Hz	According to the audio source, select
Freq		the Bass Center Frequency to
	80Hz
		achieve the best Bass effect.
	100Hz
	130Hz
	150Hz
	200Hz
Treble Center	10KHz	According to the audio source, select
Freq		the Treble Center Frequency to
	12.5KHz
		achieve the best Treble effect.
	15KHz
	17KHz

		VM9311
Table 6: ASP Config Menu Features
Setting	Options	Function
Sub Filter	80Hz	Selecting a crossover frequency sets
		a cut-off frequency of the subwoofer's
	120Hz
		LPF (low-pass filter) and the
		“SMALL” speakers' HPF (high-pass
	160Hz
		filter). The Crossover frequency set-
		ting has no effect if the subwoofer is
		set to “OFF” and any other speaker is
		set to “LARGE”.
Sub Phase	0D	Subwoofer output IN phase
	180D	Subwoofer output OUT OF phase
		NOTE: Depending on your installa-
		tion, reversing the subwoofer phase
		may increase Bass output.
Bass Q-Factor	1.0	When the Bass Center Frequency is
		selected, adjusting the Bass Q-Fac-
	1.25
		tor alters the sharpness of the Bass
		output.
	1.5
	2.0
		Return to previous menu.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the SYS SETUP button (31) on the remote control or the DISP button (5) on the front panel.

14