Panasonic NV-FJ710 Series operating instructions Assemble Editing, Advanced Operations

Page 33

Editing

Assemble Editing

The assemble editing function makes it easy to record the picture and sound of virtually any number of scenes or programmes in succession.

Assemble editing from an external source, for example from a video movie camera, can be performed in the same way.

Recording unit (this VCR)

 

Front

Rear

]

^

f

g

 

Video movie

Other VCR

 

 

camera

 

 

 

 

Preparations

≥Connect a video movie camera or a VCR to this VCR with an audio/video cable or a 21-pin Scart cable, as shown in the illustration.

≥Display the VCR picture on the TV.

≥Insert the cassette on which the assemble editing is to be performed, and make sure that its erasure prevention tab is not broken out.

As soon as the cassette is inserted, the Cassette Number Check starts. Wait a few moments until it is completed. (See page 15.)

≥Set the VCR/TV switch P to “VCR”.

≥Press the INPUT SELECT button 3 to select the AV Input (external input) “A1”, “A2” or “A3” according to the socket(s) on the VCR to which the source unit has been connected.

A1: When connected to the AV1 21-pin Scart socket f

A2: When connected to the AV2 21-pin Scart socket g

≥Make sure that “AV2” is set to “EXT”.

(See page 50.)

A3: When connected to the Video Input socket ] and Audio Input sockets ^ on the front panel of the this VCR

≥Use the L connector for operations in the normal (monaural) mode.

Operations

1Press the Play button I to start playback.

2At the point where you want to join a new scene, press the Pause/Slow button 7 to put it in the still playback mode.

3Press the REC button J to put it in the recording pause mode.

4Start playback on the source unit and search for the point from which you want to record (copy) onto this VCR.

5When that point is reached, press the Pause/Slow button 7 again to start recording the new picture and sound from the playback unit.

6To record (copy) additional scenes, press the Pause/ Slow button 7 to put this VCR in the recording pause mode and then perform steps 4 and 5 again.

7At the point where you want to stop recording, press the Stop button 9 to finish recording.

Hints:

≥The new sound is recorded on both the Hi-Fi audio tracks and the normal audio track. The sound recorded on the normal audio track is always in mono.

≥If you want to change the audio recording level, adjust it. (See page 20.)

Note:

≥If you leave the VCR in the recording pause mode for more than 5 minutes in step 3 or 6, the VCR automatically switches over to the stop mode to protect the video heads.

Advanced Operations

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents NV-FJ710 Series Dear Customer ContentsH ij Controls and ComponentsVCR Operation To Cancel the Child Lock FunctionNumeric buttons To Activate the Child Lock FunctionChecking the Accessories/Preparing the Remote Control UseBefore Keep the VCR away from high temperatures Avoid sudden changes in temperatureCleaning the VCR Avoid humidity and dustBefore Use Do not Remove Outer CoverRemarks TV Operation Setting the Remote Control to Operate Your TVManufacturer Code List of TVs Compatible with the VCR’s Remote ControlHints Connecting SettingOr Method Auto Setup Function Tuned Correctly by the Auto Setup FunctionTo Confirm that the TV Stations Have Been ≥ If you select Schweiz Setting Up When You Insert a Video CassetteWhen inserting a cassette that was recorded on this VCR If you want to cancel the Cassette Number Check midwayTo Play back S-VHS Cassette Tape SQPBuS-VHS Quasi Playback PlaybackConvenient Automatic Functions To Play Back a Recorded Part RepeatedlyTo Select the Desired Tape Speed RecordingTo Pause Recording To Display the Approximate Remaining Tape TimeLinked Timer Recordings with a Digital Receiver To Prevent Accidental Erasure of Recorded ContentsRecording To Manually Adjust the Audio Recording Level To Suspend the Timer Recording Standby Timer RecordingTo Programme with the On Screen Display OSD ModeTo Suspend the Timer Recording Standby Mode Press the OK button T again to conclude SettingsTo Programme with ShowView Function Timer Other Timer Recordings and Convenient FunctionsSetting the Recording Date/Days To Activate the Auto SP/LP Change FunctionProgramming a Timer Recording of a Satellite Programme To Check the Contents of Timer Recording ProgrammingsTo Change a Timer Recording Programming Timer Recording To Cancel the Programming of a Timer RecordingTo Check the Total Timer Recording Programming Time Precautions for Recording How to Read the Tape Library ContentsTape Library System To Check the Tape Library Data TapeTo Check on Which Cassette a Desired Programme Is Recorded Desired programme title Tape Library System To Manually Enter or Editing a Title or CategoryPress the OK button T again if you are sure that you To Demonstrate the Tape Library System To Restore Deleted Tape Library DataTo Cancel the Intro-Jet Scan or to Stop Playback To Cancel the Index Search or to Stop PlaybackSearch Functions OperationEditing Assemble EditingAdvanced Operations To Change the Recording Time Album FunctionAudio Dubbing General Audio Dubbing on a Panasonic Hi-Fi VCRTV Mode VCR ModeTo Connect the VCR to a Decoder To Connect the VCR to a Stereo AmplifierHow to install the satellite receiver Preparation Standby Typ Action Yes To Prepare the Satellite ReceiverTo select SAT 9 Enter To select SAT 19 EnterTo Enter or Change the Name of a TV Station Various SettingsList of TV Reception Channels To Preset Pay TV StationsTo Change the Channel Number of an Already Tuned TV Station Channel TV Channel Indication Germany/Italy Other CountriesTo Change the Subtitle Teletext Page Number Subtitles To Change the Type of Video System Colour TV systemTo Change the Title Teletext Page Number Title Various Settings To Restart the Download Setting the VCR’s Clock To Manually Adjust the ClockTo Activate the Automatic Time Correction Function Settings for the Main Menu Item Display Other Convenient Functions Various SettingsPress the Menu button U to display the Main menu on To Set the Playback Picture Sharpness Sharper or Softer Settings for the Main Menu Item FunctionsTo Set the Audio Mode to Be Used During Playback To Set the Remote Control ModeCountry Setting Language SettingGlossary VPS Video Programme System/ PDC Programme Delivery ControlNicam Broadcasting System NV-FJ710EC/ECM/ECY Series Link Function Crystal View Control CVCPin Scart Socket √ On Screen Display Messages Before Requesting Service√ The VCR Does Not Work Correctly √ Playback Does Not Work Properly√ Recording Is Not Possible or Does Not Work Properly √ The Remote Control Does Not Work Correctly√ The Satellite Receiver Cannot Be Controlled Correctly √ The Tape Library System Does Not Work CorrectlyIf the Still Picture Scrolls Up or Down V-Lock Adjustment Adjusting the Playback PicturePrecautions To Return to Auto TrackingSpecifications
Top Page Image Contents