Panasonic NV-FJ710 Series operating instructions Audio Dubbing

Page 35
ADUB 0:00:29

Audio Dubbing

The audio dubbing function lets you record new sound onto the normal (mono) audio track. Although this erases the original sound on the normal audio track, the sound on the Hi-Fi audio tracks remains unchanged. Use this function to add narration or background music to a previously made recordings.

Í/I <EJECT

DIRECT

A.DUB

TV REC

^

Audio equipment or

Video movie camera

1 2

3 A.DUB

5 A.DUB 6

Preparations

≥Connect the audio equipment or a video movie camera to this VCR with an audio cable.

≥Display the VCR picture on the TV.

≥Insert the cassette on which the audio dubbing is to be performed, and make sure that its erasure prevention tab is not broken out.

As soon as the cassette is inserted, the Cassette Number Check starts. Wait a few moments until it is completed. (See page 15.)

≥Press the INPUT SELECT button 3 to select the AV Input (external input) “A1”, “A2” or “A3” according to the socket(s) on the VCR to which you have connected the source unit. A1: When connected to the AV1 21-pin Scart socket f

A2: When connected to the AV2 21-pin Scart socket g

≥Make sure that “AV2” is set to “EXT”.

(See page 50.)

A3: When connected to the Audio Input sockets ^ on the front panel of this VCR

≥Use the L connector for operations in the normal (monaural) mode.

Operations

1Press the Play button I on this VCR to start playback to search for the point from which you want to start audio dubbing.

2At the point from which you want to perform audio dubbing, press the Pause/Still button d on this VCR to put it in the still playback mode.

3Press the A.DUB button _ on this VCR to put it in the recording pause mode.

4Start playback on the source unit so that you can hear the sound.

5 When you reach the point from which you want to start audio

dubbing, press the Pause/Still button d on this VCR again to start recording the new sound or start your narration.

6At the point where you want to stop audio dubbing, press the Stop button 9 to finish recording.

Hints:

≥The new sound is recorded on the normal audio track. The original sound remains on the Hi-Fi audio tracks. The sound recorded on the normal audio track is always in mono.

≥For audio dubbing with narration, you can use the built-in microphone of the connected video movie camera.

≥If you want to change the audio recording level, adjust it. (See page 20.)

≥To listen to the sound recorded with audio dubbing, press the AUDIO button ? during playback to select the normal audio track. (For details, refer to page 16.)

≥To listen to the sound recorded with audio dubbing together with the original sound, first set “Audio mode”

to “MIX” (for details, refer to page 51) and then

press the AUDIO button ? during playback to select the mixed sound.

Advanced Operations

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents NV-FJ710 Series Dear Customer ContentsH ij Controls and ComponentsTo Activate the Child Lock Function To Cancel the Child Lock FunctionVCR Operation Numeric buttonsBefore Checking the Accessories/Preparing the Remote ControlUse Avoid humidity and dust Avoid sudden changes in temperatureKeep the VCR away from high temperatures Cleaning the VCRRemarks Before UseDo not Remove Outer Cover TV Operation Setting the Remote Control to Operate Your TVManufacturer Code List of TVs Compatible with the VCR’s Remote ControlHints Connecting SettingOr Method To Confirm that the TV Stations Have Been Auto Setup FunctionTuned Correctly by the Auto Setup Function ≥ If you select Schweiz If you want to cancel the Cassette Number Check midway When You Insert a Video CassetteSetting Up When inserting a cassette that was recorded on this VCRTo Play back S-VHS Cassette Tape SQPBuS-VHS Quasi Playback PlaybackConvenient Automatic Functions To Play Back a Recorded Part RepeatedlyTo Display the Approximate Remaining Tape Time RecordingTo Select the Desired Tape Speed To Pause RecordingRecording Linked Timer Recordings with a Digital ReceiverTo Prevent Accidental Erasure of Recorded Contents To Manually Adjust the Audio Recording Level Mode Timer RecordingTo Suspend the Timer Recording Standby To Programme with the On Screen Display OSDTo Programme with ShowView Function To Suspend the Timer Recording Standby ModePress the OK button T again to conclude Settings To Activate the Auto SP/LP Change Function Other Timer Recordings and Convenient FunctionsTimer Setting the Recording Date/DaysTo Change a Timer Recording Programming Programming a Timer Recording of a Satellite ProgrammeTo Check the Contents of Timer Recording Programmings To Check the Total Timer Recording Programming Time Timer RecordingTo Cancel the Programming of a Timer Recording Tape Library System Precautions for RecordingHow to Read the Tape Library Contents To Check on Which Cassette a Desired Programme Is Recorded To Check the Tape Library DataTape Desired programme title Tape Library System To Manually Enter or Editing a Title or CategoryPress the OK button T again if you are sure that you To Demonstrate the Tape Library System To Restore Deleted Tape Library DataOperation To Cancel the Index Search or to Stop PlaybackTo Cancel the Intro-Jet Scan or to Stop Playback Search FunctionsAdvanced Operations EditingAssemble Editing To Change the Recording Time Album FunctionAudio Dubbing General Audio Dubbing on a Panasonic Hi-Fi VCRTo Connect the VCR to a Stereo Amplifier VCR ModeTV Mode To Connect the VCR to a DecoderHow to install the satellite receiver Preparation To select SAT 19 Enter To Prepare the Satellite ReceiverStandby Typ Action Yes To select SAT 9 EnterTo Enter or Change the Name of a TV Station Various SettingsChannel TV Channel Indication Germany/Italy Other Countries To Preset Pay TV StationsList of TV Reception Channels To Change the Channel Number of an Already Tuned TV StationTo Change the Subtitle Teletext Page Number Subtitles To Change the Type of Video System Colour TV systemTo Change the Title Teletext Page Number Title Various Settings To Restart the Download To Activate the Automatic Time Correction Function Setting the VCR’s ClockTo Manually Adjust the Clock Settings for the Main Menu Item Display Other Convenient Functions Various SettingsPress the Menu button U to display the Main menu on To Set the Playback Picture Sharpness Sharper or Softer Settings for the Main Menu Item FunctionsTo Set the Audio Mode to Be Used During Playback To Set the Remote Control ModeCountry Setting Language SettingNicam Broadcasting System NV-FJ710EC/ECM/ECY Series GlossaryVPS Video Programme System/ PDC Programme Delivery Control Pin Scart Socket Link FunctionCrystal View Control CVC √ Playback Does Not Work Properly Before Requesting Service√ On Screen Display Messages √ The VCR Does Not Work Correctly√ The Tape Library System Does Not Work Correctly √ The Remote Control Does Not Work Correctly√ Recording Is Not Possible or Does Not Work Properly √ The Satellite Receiver Cannot Be Controlled CorrectlyTo Return to Auto Tracking Adjusting the Playback PictureIf the Still Picture Scrolls Up or Down V-Lock Adjustment PrecautionsSpecifications
Top Page Image Contents