Panasonic NV-FJ710 Series operating instructions How to install the satellite receiver

Page 38

Connecting the VCR to a Satellite Receiver or Digital Receiver

Satellite receiver here includes a digital receiver.

The connection method differs depending on the type of your satellite receiver.

For details about the connection, also read the satellite receiver’s operating instructions.

If the Satellite Receiver is Equipped with a 21-pin Scart Socket

If your satellite receiver is equipped with a 21-pin Scart socket, use a 21-pin Scart cable to connect the VCR.

For the connection to the TV, refer to pages 10 and 12.

Be sure to keep the VCR, TV and satellite receiver switched off until you have finished all connections.

For your safety, do not connect or handle the equipment with wet hands.

g

Satellite receiver (not supplied)

 

 

1

2

21-pin Scart socket

 

To an AC Mains socket

 

≥If your satellite

21-pin Scart cable

 

 

receiver has a VCR

(not supplied)

 

socket, connect the

 

 

cable to it.

 

1Connect a 21-pin Scart cable (not supplied) to the AV2 21-pin Scart socket g on the VCR and to the 21-pin Scart socket on the satellite receiver.

2Connect the satellite receiver’s mains lead to an AC mains socket.

3Set “AV2” to “TIMER” or “EXT”. For details, see page 50.

If the Satellite Receiver Is Not Equipped with a 21-Pin Scart Socket

In case your satellite receiver is not equipped with a 21-pin Scart socket, use the RF coaxial cable to connect it to the VCR.

For the connection to the TV, refer to pages 10 and 12.

Be sure to keep the VCR, TV and satellite receiver switched off until you have finished all connections.

For your safety, do not connect or handle the equipment with wet hands.

 

Aerial (not supplied)

Satellite receiver

Aerial Input socket

 

(not supplied)

Aerial lead

 

 

 

(not supplied)

 

 

1

3

Aerial Output

 

socket

 

To an AC mains socket

2

i

RF coaxial cable

 

(not supplied)

1Connect the aerial lead to the Aerial Input socket on the satellite receiver.

2Connect the RF coaxial cable to the Aerial Output socket on the satellite receiver and to the Aerial Input socket i on the VCR.

3Connect the satellite receiver’s mains lead to an AC mains socket.

Hint:

≥The RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR, e.g. re-adjust to channel 33.

Note:

How to install the satellite receiver

Carefully observe the following points so that you can control the satellite receiver from the VCR.

1Place the satellite receiver on top of the VCR.

2Move the satellite receiver back a few centimetres so that infra-red signals emitted from the top of the VCR’s front panel can be received by the satellite receiver.

Satellite receiver

Infra-red signal transmitter [

21-pin Scart cable or RF coaxial cable

VCR

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents NV-FJ710 Series Contents Dear CustomerControls and Components H ijNumeric buttons To Cancel the Child Lock FunctionVCR Operation To Activate the Child Lock FunctionBefore Checking the Accessories/Preparing the Remote ControlUse Cleaning the VCR Avoid sudden changes in temperatureKeep the VCR away from high temperatures Avoid humidity and dustRemarks Before UseDo not Remove Outer Cover Setting the Remote Control to Operate Your TV TV OperationList of TVs Compatible with the VCR’s Remote Control Manufacturer CodeHints Setting ConnectingOr Method To Confirm that the TV Stations Have Been Auto Setup FunctionTuned Correctly by the Auto Setup Function ≥ If you select Schweiz When inserting a cassette that was recorded on this VCR When You Insert a Video CassetteSetting Up If you want to cancel the Cassette Number Check midwayPlayback To Play back S-VHS Cassette Tape SQPBuS-VHS Quasi PlaybackTo Play Back a Recorded Part Repeatedly Convenient Automatic FunctionsTo Pause Recording RecordingTo Select the Desired Tape Speed To Display the Approximate Remaining Tape TimeRecording Linked Timer Recordings with a Digital ReceiverTo Prevent Accidental Erasure of Recorded Contents To Manually Adjust the Audio Recording Level To Programme with the On Screen Display OSD Timer RecordingTo Suspend the Timer Recording Standby ModeTo Programme with ShowView Function To Suspend the Timer Recording Standby ModePress the OK button T again to conclude Settings Setting the Recording Date/Days Other Timer Recordings and Convenient FunctionsTimer To Activate the Auto SP/LP Change FunctionTo Change a Timer Recording Programming Programming a Timer Recording of a Satellite ProgrammeTo Check the Contents of Timer Recording Programmings To Check the Total Timer Recording Programming Time Timer RecordingTo Cancel the Programming of a Timer Recording Tape Library System Precautions for RecordingHow to Read the Tape Library Contents To Check on Which Cassette a Desired Programme Is Recorded To Check the Tape Library DataTape Desired programme title To Manually Enter or Editing a Title or Category Tape Library SystemPress the OK button T again if you are sure that you To Restore Deleted Tape Library Data To Demonstrate the Tape Library SystemSearch Functions To Cancel the Index Search or to Stop PlaybackTo Cancel the Intro-Jet Scan or to Stop Playback OperationAdvanced Operations EditingAssemble Editing Album Function To Change the Recording TimeAudio Dubbing Audio Dubbing on a Panasonic Hi-Fi VCR GeneralTo Connect the VCR to a Decoder VCR ModeTV Mode To Connect the VCR to a Stereo AmplifierHow to install the satellite receiver Preparation To select SAT 9 Enter To Prepare the Satellite ReceiverStandby Typ Action Yes To select SAT 19 EnterVarious Settings To Enter or Change the Name of a TV StationTo Change the Channel Number of an Already Tuned TV Station To Preset Pay TV StationsList of TV Reception Channels Channel TV Channel Indication Germany/Italy Other CountriesTo Change the Type of Video System Colour TV system To Change the Subtitle Teletext Page Number SubtitlesTo Change the Title Teletext Page Number Title Various Settings To Restart the Download To Activate the Automatic Time Correction Function Setting the VCR’s ClockTo Manually Adjust the Clock Other Convenient Functions Various Settings Settings for the Main Menu Item DisplayPress the Menu button U to display the Main menu on Settings for the Main Menu Item Functions To Set the Playback Picture Sharpness Sharper or SofterTo Set the Remote Control Mode To Set the Audio Mode to Be Used During PlaybackLanguage Setting Country SettingNicam Broadcasting System NV-FJ710EC/ECM/ECY Series GlossaryVPS Video Programme System/ PDC Programme Delivery Control Pin Scart Socket Link FunctionCrystal View Control CVC √ The VCR Does Not Work Correctly Before Requesting Service√ On Screen Display Messages √ Playback Does Not Work Properly√ The Satellite Receiver Cannot Be Controlled Correctly √ The Remote Control Does Not Work Correctly√ Recording Is Not Possible or Does Not Work Properly √ The Tape Library System Does Not Work CorrectlyPrecautions Adjusting the Playback PictureIf the Still Picture Scrolls Up or Down V-Lock Adjustment To Return to Auto TrackingSpecifications
Top Page Image Contents