Panasonic NV-FJ710 Series Setting the Remote Control to Operate Your TV, TV Operation

Page 8

Setting the Remote Control to Operate Your TV

This setting procedure allows you to operate the TVs of most brands using the remote control supplied with this VCR.

≥Some TV models cannot be operated with this remote control.

1Set the VCR/TV switch P to “TV”.

2Look up your TV’s manufacturer in the list of TVs compatible with the VCR’s remote control on the next page.

3While keeping the TV-ON/OFF button 1 pressed, use the Numeric buttons 2 to enter the manufacturer’s code. If there is more than one code listed for that manufacturer, try the first code.

Be sure to enter the code in two digits. Example: 01

4Check whether you can operate the TV correctly with the VCR’s remote control.

If the TV cannot be operated properly:

In step 3, enter the other code listed for that manufacturer and repeat step 4.

TV Operation

The explanations below show you what functions individual buttons have when the VCR/TV switch P is set to “TV”.

°°1 TV-ON/OFF button

To switch the TV on from standby mode (OFF) or vice versa.

On some TVs it is only possible to switch the TV to standby mode (OFF) with this button, but not on. In this case, try to turn the TV on with one of the following buttons:

Numeric buttons 2

AV button 3

Channel button N

°°2 Numeric buttons

To select the programme positions (1–99) on the TV.

°°3 AV button

To select the desired AV input on the TV.

°°N Channel button

To select the desired programme position (TV station) on the TV.

°°O TV/TEXT button

To switch between normal TV mode and teletext mode.

°°W Teletext buttons

If your TV is equipped for Teletext reception, you can use these buttons to change the teletext information displayed on the screen and select desired information. For details, refer to your TV’s operating instructions.

°°X TV ASPECT button

To switch the screen format between the wide-screen and other formats.

°°Y VOLUME button

To adjust the volume of the TV.

The 3 Methods for Switching

to the AV Input on Your Panasonic TV

Your Panasonic TV uses one of three different methods for switching between TV reception and the AV input(s). Perform the operations steps listed for the switching methods A, B and C below to determine which one your Panasonic TV uses.

A1 Set the VCR/TV switch P to “TV”.

2 Press the AV button 3 to switch to the AV Input. Each press of the AV button 3 switches between “TV reception” and “AV Input(s)”.

B1 Set the VCR/TV switch P to “TV”.

2 Press the AV button 3.

Colour bars for selecting the AV Input appear on the TV screen.

3 Follow the instructions displayed on the TV screen to select the desired AV Input from the displayed colour bars for the AV Input by pressing the corresponding colour button J (red) :, DATEi (green) ;, ONi (yellow) G or OFFi (blue) F on the remote control.

C1 Set the VCR/TV switch P to “TV”.

2 Press the AV button 3.

The last previously selected AV Input indication appears on the TV screen. The indications for selecting another AV Input also appear,

but they disappear a few seconds later.

3 Before the indications for selecting another AV Input disappear, press the I button :, DATEj button ;, ONj button G or OFFj button F to select the desired AV input.

With the following four buttons, you can move and select as follows:

I :: Move left

DATEj ;: Move down

ONj G: Move up

OFFj F: Move right

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents NV-FJ710 Series Contents Dear CustomerControls and Components H ijTo Cancel the Child Lock Function VCR OperationNumeric buttons To Activate the Child Lock FunctionBefore Checking the Accessories/Preparing the Remote ControlUse Avoid sudden changes in temperature Keep the VCR away from high temperaturesCleaning the VCR Avoid humidity and dustRemarks Before UseDo not Remove Outer Cover Setting the Remote Control to Operate Your TV TV OperationList of TVs Compatible with the VCR’s Remote Control Manufacturer CodeHints Setting ConnectingOr Method To Confirm that the TV Stations Have Been Auto Setup FunctionTuned Correctly by the Auto Setup Function ≥ If you select Schweiz When You Insert a Video Cassette Setting UpWhen inserting a cassette that was recorded on this VCR If you want to cancel the Cassette Number Check midwayPlayback To Play back S-VHS Cassette Tape SQPBuS-VHS Quasi PlaybackTo Play Back a Recorded Part Repeatedly Convenient Automatic FunctionsRecording To Select the Desired Tape SpeedTo Pause Recording To Display the Approximate Remaining Tape TimeRecording Linked Timer Recordings with a Digital ReceiverTo Prevent Accidental Erasure of Recorded Contents To Manually Adjust the Audio Recording Level Timer Recording To Suspend the Timer Recording StandbyTo Programme with the On Screen Display OSD ModeTo Programme with ShowView Function To Suspend the Timer Recording Standby ModePress the OK button T again to conclude Settings Other Timer Recordings and Convenient Functions TimerSetting the Recording Date/Days To Activate the Auto SP/LP Change FunctionTo Change a Timer Recording Programming Programming a Timer Recording of a Satellite ProgrammeTo Check the Contents of Timer Recording Programmings To Check the Total Timer Recording Programming Time Timer RecordingTo Cancel the Programming of a Timer Recording Tape Library System Precautions for RecordingHow to Read the Tape Library Contents To Check on Which Cassette a Desired Programme Is Recorded To Check the Tape Library DataTape Desired programme title To Manually Enter or Editing a Title or Category Tape Library SystemPress the OK button T again if you are sure that you To Restore Deleted Tape Library Data To Demonstrate the Tape Library SystemTo Cancel the Index Search or to Stop Playback To Cancel the Intro-Jet Scan or to Stop PlaybackSearch Functions OperationAdvanced Operations EditingAssemble Editing Album Function To Change the Recording TimeAudio Dubbing Audio Dubbing on a Panasonic Hi-Fi VCR GeneralVCR Mode TV ModeTo Connect the VCR to a Decoder To Connect the VCR to a Stereo AmplifierHow to install the satellite receiver Preparation To Prepare the Satellite Receiver Standby Typ Action YesTo select SAT 9 Enter To select SAT 19 EnterVarious Settings To Enter or Change the Name of a TV StationTo Preset Pay TV Stations List of TV Reception ChannelsTo Change the Channel Number of an Already Tuned TV Station Channel TV Channel Indication Germany/Italy Other CountriesTo Change the Type of Video System Colour TV system To Change the Subtitle Teletext Page Number SubtitlesTo Change the Title Teletext Page Number Title Various Settings To Restart the Download To Activate the Automatic Time Correction Function Setting the VCR’s ClockTo Manually Adjust the Clock Other Convenient Functions Various Settings Settings for the Main Menu Item DisplayPress the Menu button U to display the Main menu on Settings for the Main Menu Item Functions To Set the Playback Picture Sharpness Sharper or SofterTo Set the Remote Control Mode To Set the Audio Mode to Be Used During PlaybackLanguage Setting Country SettingNicam Broadcasting System NV-FJ710EC/ECM/ECY Series GlossaryVPS Video Programme System/ PDC Programme Delivery Control Pin Scart Socket Link FunctionCrystal View Control CVC Before Requesting Service √ On Screen Display Messages√ The VCR Does Not Work Correctly √ Playback Does Not Work Properly√ The Remote Control Does Not Work Correctly √ Recording Is Not Possible or Does Not Work Properly√ The Satellite Receiver Cannot Be Controlled Correctly √ The Tape Library System Does Not Work CorrectlyAdjusting the Playback Picture If the Still Picture Scrolls Up or Down V-Lock AdjustmentPrecautions To Return to Auto TrackingSpecifications
Top Page Image Contents