Panasonic NV-FJ710 Series To Connect the VCR to a Decoder, AV Link Function, VCR Mode, TV Mode

Page 37

Connecting the VCR to a Decoder/ Connecting the VCR to a Stereo Amplifier

To connect this VCR to a decoder or a stereo amplifier, make the connections shown in the illustration below.

For the connection to the TV, see pages 10 and 12.

For details about the connection, also read the operating instructions of the decoder or stereo amplifier.

Be sure to keep the VCR, TV and decoder or stereo amplifier switched off until you have finished all connections.

For your safety, do not connect or handle the equipment with wet hands.

To Connect the VCR to a Decoder

Decoder here refers to the device used to decode scrambled broadcasts (Pay TV).

≥When you start playback on the VCR, the TV is automatically switched to the VCR mode. However, during playback, it is not possible to switch the TV back to the TV mode.

≥If a Pay TV station has been selected on the VCR when you switch to the TV mode, the picture on the TV is scrambled when you select a Pay TV station on the TV. In this case, either switch to the VCR mode or select the AV input on the TV.

Hint:

≥“RGB” means separate Red/Green/Blue colour signals.

If you connect a TV equipped with RGB input capability to the AV1 socket f on this VCR, and a decoder equipped with RGB output capability to the AV2 socket g, the TV can receive RGB signal input from the decoder via the VCR.

To Connect the VCR to a Stereo Amplifier

g

Decoder (not supplied)

1

Audio cable (not supplied)

1 h

2

 

 

21-pin Scart socket

To an AC mains socket

 

21-pin Scart cable

 

(not supplied)

 

 

1Connect a 21-pin Scart cable (not supplied) to the AV2 21-pin Scart socket g on the VCR and to the 21-pin Scart socket on the decoder.

2Connect the decoder’s mains lead to an AC mains socket.

3Set “AV2” to “DECODER”. For details, see page 50.

AV Link Function

If the VCR is connected to the TV via a 21-pin Scart cable, you can use the AV LINK button B to switch the TV from normal TV reception over to the video playback channel (AV input) (and vice versa). In the VCR mode (when the VCR indication in the VCR display is lit), the TV is switched to the video playback channel (AV input). In the TV mode (when the VCR indication is not lit), the TV is switched to TV reception.

 

VCR

TV

VCR Mode

VCR indication

AV Input

 

is lit.

is selected.

 

 

 

TV Mode

VCR indication

TV reception is

 

is not lit.

selected.

Audio Input sockets

Stereo amplifier (not supplied)

2

To an AC mains socket

1Connect an Audio cable (not supplied) to the Audio Output sockets h on the VCR and to Audio Input sockets on the stereo amplifier.

2Connect the stereo amplifier’s mains lead to an AC mains socket.

Advanced Operations

≥When you press the MENU button U to display the menu on the TV screen, the TV is also automatically switched to the VCR mode, however, the VCR indication does not appear in this case.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents NV-FJ710 Series Dear Customer ContentsH ij Controls and ComponentsVCR Operation To Cancel the Child Lock FunctionNumeric buttons To Activate the Child Lock FunctionUse Checking the Accessories/Preparing the Remote ControlBefore Keep the VCR away from high temperatures Avoid sudden changes in temperatureCleaning the VCR Avoid humidity and dustDo not Remove Outer Cover Before UseRemarks TV Operation Setting the Remote Control to Operate Your TVManufacturer Code List of TVs Compatible with the VCR’s Remote ControlHints Connecting SettingOr Method Tuned Correctly by the Auto Setup Function Auto Setup FunctionTo Confirm that the TV Stations Have Been ≥ If you select Schweiz Setting Up When You Insert a Video CassetteWhen inserting a cassette that was recorded on this VCR If you want to cancel the Cassette Number Check midwayTo Play back S-VHS Cassette Tape SQPBuS-VHS Quasi Playback PlaybackConvenient Automatic Functions To Play Back a Recorded Part RepeatedlyTo Select the Desired Tape Speed RecordingTo Pause Recording To Display the Approximate Remaining Tape TimeTo Prevent Accidental Erasure of Recorded Contents Linked Timer Recordings with a Digital ReceiverRecording To Manually Adjust the Audio Recording Level To Suspend the Timer Recording Standby Timer RecordingTo Programme with the On Screen Display OSD ModePress the OK button T again to conclude Settings To Suspend the Timer Recording Standby ModeTo Programme with ShowView Function Timer Other Timer Recordings and Convenient FunctionsSetting the Recording Date/Days To Activate the Auto SP/LP Change FunctionTo Check the Contents of Timer Recording Programmings Programming a Timer Recording of a Satellite ProgrammeTo Change a Timer Recording Programming To Cancel the Programming of a Timer Recording Timer RecordingTo Check the Total Timer Recording Programming Time How to Read the Tape Library Contents Precautions for RecordingTape Library System Tape To Check the Tape Library DataTo Check on Which Cassette a Desired Programme Is Recorded Desired programme title Tape Library System To Manually Enter or Editing a Title or CategoryPress the OK button T again if you are sure that you To Demonstrate the Tape Library System To Restore Deleted Tape Library DataTo Cancel the Intro-Jet Scan or to Stop Playback To Cancel the Index Search or to Stop PlaybackSearch Functions OperationAssemble Editing EditingAdvanced Operations To Change the Recording Time Album FunctionAudio Dubbing General Audio Dubbing on a Panasonic Hi-Fi VCRTV Mode VCR ModeTo Connect the VCR to a Decoder To Connect the VCR to a Stereo AmplifierHow to install the satellite receiver Preparation Standby Typ Action Yes To Prepare the Satellite ReceiverTo select SAT 9 Enter To select SAT 19 EnterTo Enter or Change the Name of a TV Station Various SettingsList of TV Reception Channels To Preset Pay TV StationsTo Change the Channel Number of an Already Tuned TV Station Channel TV Channel Indication Germany/Italy Other CountriesTo Change the Subtitle Teletext Page Number Subtitles To Change the Type of Video System Colour TV systemTo Change the Title Teletext Page Number Title Various Settings To Restart the Download To Manually Adjust the Clock Setting the VCR’s ClockTo Activate the Automatic Time Correction Function Settings for the Main Menu Item Display Other Convenient Functions Various SettingsPress the Menu button U to display the Main menu on To Set the Playback Picture Sharpness Sharper or Softer Settings for the Main Menu Item FunctionsTo Set the Audio Mode to Be Used During Playback To Set the Remote Control ModeCountry Setting Language SettingVPS Video Programme System/ PDC Programme Delivery Control GlossaryNicam Broadcasting System NV-FJ710EC/ECM/ECY Series Crystal View Control CVC Link FunctionPin Scart Socket √ On Screen Display Messages Before Requesting Service√ The VCR Does Not Work Correctly √ Playback Does Not Work Properly√ Recording Is Not Possible or Does Not Work Properly √ The Remote Control Does Not Work Correctly√ The Satellite Receiver Cannot Be Controlled Correctly √ The Tape Library System Does Not Work CorrectlyIf the Still Picture Scrolls Up or Down V-Lock Adjustment Adjusting the Playback PicturePrecautions To Return to Auto TrackingSpecifications
Top Page Image Contents