Panasonic NV-FJ710 Series Setting the VCR’s Clock, To Manually Adjust the Clock

Setting the VCR’s Clock

Usually, the VCR’s Auto Setup or Download function automatically adjusts the clock to the correct time.

Under some reception conditions, however, the VCR cannot set the clock automatically.

In this case, follow the operation steps below to manually set the clock.

To Manually Adjust the Clock

1Press the MENU button U to display the Main menu on the TV screen.

2Press the Cursor buttons (34) R to select “Clock”. ≥ The Clock setting menu appears on the TV.

3 Use the Cursor button (1) R to
	Main menu
move to the Clock setting menu,	Timer record
	Tape Library	Automatic:	OFF
confirm that “Automatic” is set to	Display
	Tuning	Time :	20:30:24
“OFF”, and then press the OK	Clock
		Date :	16.10.05
	Functions
button T.	Language
	Country
	Satellite
4 Use the Cursor buttons
(3421) R to set the date and
time.	Main menu
	Timer record
≥ Instead of the Cursor buttons	Tape Library	Automatic: OFF
(3421) R, you can also	Display
	Tuning	Time :	20:30:24
use the Numeric buttons 2 to	Clock
		Date :	16.10.05
	Functions
set the date and time. (Set the	Language
	Country
VCR/TV switch P to “VCR”.)	Satellite

5Press the OK button T to conclude the setting.

6Press the EXIT button S to exit the On Screen Display.

To Activate the Automatic Time Correction Function

If a TV station transmits a signal for time setting, performing the operation steps below activates the Automatic time correction function and the time is corrected automatically.

1Press the MENU button U to display the Main menu on the TV screen.

2Press the Cursor buttons (34) R to select “Clock”. ≥ The Clock setting menu appears on the TV.

3 Use the Cursor button (1) R to	Main menu
	Timer record
move to the Clock setting menu,	Tape Library
		Automatic:	ON
	Display
and then use the Cursor buttons
	Clock
	Tuning	Time :	20:30:24
(34) R to set “Automatic” to	Functions	Date :	16.10.05
	Language
“ON”.	Country
	Satellite

4Press the OK button T to conclude the setting.

≥Under adverse reception conditions, etc., the Automatic time correction function may not work. In this case, the indication for “Automatic” is automatically reset to “OFF”.

If the reception conditions improve later on, it may be possible to activate this function.

5Press the EXIT button S to exit the On Screen Display.

Hints:

≥If “Automatic” is set to “ON” when you open the Clock screen, do not set it to “OFF”, otherwise, the automatic time correcting function is deactivated.

≥The built-in clock employs the 24-hour system.

≥In case of a power failure, an automatic back-up system automatically maintains the operation of the clock for at least 60 minutes.

≥When “Automatic” on the Clock setting menu is set to “ON”, the automatic time correction function checks and if necessary adjusts the time several times every day.

The automatic time correction function only works when the VCR is switched off; it does not work in the timer recording standby mode.

≥If “Automatic” is set to “OFF” and “Power save” to “ON” (see page 49), the time may not be maintained correctly. In this case, manually adjust the clock.

≥If “Automatic” is set to “ON” and “Power save” to “ON”, the Automatic time correction function does not work while the VCR is turned off. However, as soon as it is turned on, the Automatic time correction function is activated and the clock is set correctly.

Various Settings

47