Turning on and off the monitor, Mute

Basic Operations

English Owner’s manual

Turning the liquid crystal panel horizontal (Air conditioner operation mode)

When the way the liquid crystal panel is mounted hinders the operation of the air conditioner, the position of the panel can be turned horizontal tem- porarily.

1.Press and hold the [OPEN] button when the liquid crystal panel is upright, and release the button when a beep is heard.

2.The liquid crystal panel turns horizontal.

When the panel is closed:

Each time you press the [Z-EHCR]button of the remote control unit, the tone effect changes in the following order:

“Z-EHCR 1” ➜ “Z-EHCR 2” ➜ “Z-EHCR 3” ➜

“Z-EHCR OFF” ➜ “Z-EHCR 1”...

NOTE:

•When the panel is closed, operations can only be made through the remote control unit.

When the panel is open:

∗Press the [OPEN] button again when the liquid crystal panel is in the horizontal position, and the panel returns to the original position.

∗Even if the button is not operated for about 10 seconds, the panel returns to the original posi- tion with a warning sound.

Turning on and off the monitor

Pressing and holding the [DISP] button for 1 sec- ond or longer turns the monitor off. To return to the monitor on, press the [DISP] button once again.

∗When a button is pressed or during security moni- toring, the monitor-off mode is canceled.

1.Press the [A-M]button to change into the AU- DIO-MODE display.

2.Touch the [Z-ENHANCER]key when the AU- DIO-MODE screen is being displayed to show the Z-ENHANCER type selection screen.

3.When the Z-ENHANCER type selection screen is displayed, touch the key for the desirable type to select it.

•“TYPE 1” (Z-Enhancer 1)

•“TYPE 2” (Z-Enhancer 2)

•“TYPE 3” (Z-Enhancer 3)

•“OFF” (Z-Enhancer off)

4.When the setting is finished, touch the [RTN] key to return to the AUDIO-MODE screen.

	Mute	Touch the [RTN] key on the AUDIO-MODE
		screen to return to the STANDARD display.
	Each time you press the [s] button, mute is
		∗ To return from the Z-ENHANCER type selec-
	turned on and off.
		tion display to the STANDARD display, press the
	“MUTE” appears when mute is turned on.
		[A-M]button once again.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effect stored in memory. Select the one you prefer.

∗The factory default setting is “Z-EHCR OFF”.

When a Z-enhancer comes on (1-3), “Z-EHCR” appears in the display.

• “Z-EHCR 1” (Z-Enhancer 1):

Setting emphasizing bass.

• “Z-EHCR 2” (Z-Enhancer 2):

Setting emphasizing treble.

• “Z-EHCR 3” (Z-Enhancer 3):

Setting emphasizing bass and treble.

•“Z-EHCR OFF” (Z-Enhancer off): Neither bass nor treble are emphasized by the Z-enhancer.

Note:

•Incapable of operation when connecting DSP (DPH910) and DVD player (DVS9755z).

Adjusting the Z-enhancer

Note:

•The Z-enhancer cannot be adjusted when it is turned off.

•This function is enabled only when the panel is open.

1.Press the [A-M]button to change into the AU- DIO-MODE display.

2.Touch the [Z-EHCR LV] key when the AUDIO- MODE screen is being displayed to show the Z-ENHANCER level adjustment screen.

3.Touch the [w] or [z] key to adjust to the de- sirable level.

∗When type 1 is selected, you can adjust the bass in the range of ±2.

∗When type 2 is selected, you can adjust the treble in the range of ±2.

∗When type 3 is selected, you can adjust the bass and treble in the range of ±2.

4.When adjustment is finished, touch the [RTN] key on the Z-ENHANCER level adjustment

18 VRX815