English
Other Functions
Adjusting the dimmer level | Setting the sprite pattern speed |
Owner’s manual
You can adjust the reduced illumination level of the dimmer. When driving at night with the inside of the car, the auto dimmer function can reduce the display illumination linked “to the illumination power supply of the car” in this unit in order to prevent glare from the display.
●The factory default:
When the car light is off: Brightest setting
When the car light is on: Medium brightness
1.When the panel is open, press the [ADJ] but- ton to display the adjustment selection display.
2.Touch the [DIMMER LEVEL] key to adjust the dimmer level.
3.Touch the [+] or
4.Press the [ADJ] button again or touch the [RTN] key two times.
The unit returns to the previous mode.
Setting the button illumination
∗The factory default setting is “GREEN” (green).
∗The factory default setting is “MID” (mid).
1.When the panel is open, press the [ADJ] but- ton to select the adjustment mode.
2.Touch the [ANA SENS] key to select “HIGH” (high) or “MID” (mid) or “LOW” (low).
3.Touch the “HIGH” (high) or “MID” (mid) or “LOW” (low) key to select a desired mode and set it.
4.Press the [ADJ] button again or touch the [RTN] key. The unit returns to the previous mode.
Clock Adjustment
1.When the panel is open, press the [ADJ] but- ton to select the adjustment mode.
2.Touch the [z] key to select “CLOCK”. Touch the [CLOCK] key to adjust the time.
3.Touch the [w],[z],[a.m] or [p.m] key to ad- just the time.
∗ The time is displayed in
1.When the panel is open, press the [ADJ] but- ton to select the adjustment mode.
2.Touch the [KEY ILLUMI] key to select “RED” (red) or “GREEN” (green).
3.Touch the [RED] or [GREEN] key to select a desired mode and set it.
4.Press the [ADJ] button again or touch the [RTN] key. The unit returns to the previous mode.
Setting the beep
∗The sound heard when you make operations is called “beep”. The unit can be set up so that it does not produce this beep sound.
∗The factory default is “BEEP ON”.
1.When the panel is open, press the [ADJ] but- ton to select the adjustment mode.
2.Touch the [z] key two times to select “BEEP”.
Touch the [BEEP] key to select “ON” and “OFF”.
3.Touch the [ON] or [OFF] key to select a de- sired mode and set it.
4.Press the [ADJ] button again or touch the [RTN] key, The unit returns to the previous mode.
4.Press the [ADJ] button again or touch the [RTN] key two times. The unit returns to the previous mode.
Triggered audio mute for cellular telepones
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
∗This function is not compatible wiht all cellular telepones Contact your local authorized Clarion dealer for information on proper installation and compatibility.
36 VRX815