Clarion VRX815 owner manual Screw

Page 46

■Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles)

English Installation and Wire connection manual

This unit is designed for fixed installation in the dashboard.

If the vehicle is equipped with a factory-installed radio, install the main unit with the parts and screws marked (∗). (Figure 8)

If the vehicle is not equipped with a factory-in- stalled radio, obtain an installation kit to install the main unit in the following procedure.

1.Remove the screws from both side of the main unit.Then, at either side, lift the leaf spring until the engaging claws are released from the holes, and slide the spring to the direction of

arrow to remove it. Repeat the same for the other side to remove the springs from the both sides. (Figure 7)

2.Secure the mounting brackets to the chassis as shown in Figure 8. Holes are pre-tapped for TOYOTA and NISSAN vehicles; modification, such as drilling new holes, of the mounting brackets may be required for other models.

3.Wire as shown in Section 8.

4.Secure the unit in the dashboard, and then reassemble the dashboard and the centre panel.

2-Screw

Engagin claw

Main Unit

2-Spring

	Screwdriver
	Figure 7
	Mounting bracket ∗
4-Hexagonal screw ∗ (M5 × 8)	(1 pair for the left and right sides)

Main Unit

Centre Panel (Note 1)

∗: The parts and screws with this mark are used to install radio or included in the installation kit.

★: The parts and screws with this mark

are used to install radio or included in Figure 8 the installation kit.

Pocket

Note 2

Note 1: In some cases, the centre panel may require some modification (trimming, filling, etc.).

Note 2: If a hook on the installation bracket inter- feres with the unit, bend and flatten it with a nipper or a similar tool.

50 VRX815

Image 46

Contents VRX815 Features Display Nomenclature Color LCD Display ∗1 An example screen indication in the radio mode VTR N/P Ntsc Enhancer Type Remote Control Inserting the BatteriesFunctions of Remote Control Unit Buttons Mode Radio DAB CD changer Button MD changerRemoving the DCP Attaching the DCPCleaning the cabinet CleaningLCD panel/Generalities Switching the display Turning on and off the powerAdjusting the volume Selecting a modeHousing the liquid crystal panel Showing a mode displayAdjusting the angel, etc. Opening and turning the displayTurning on and off the monitor Setting the Z-enhancerAdjusting the Z-enhancer MuteChanging the setting of the display background Adjusting the bass and trebleAdjusting the balance and fader Turning on/off the loudnessRadio Operations Auto store Preset scanRadio Operations Manual memory Instant station recall ISR ISR memoryCD Operations Random play CD Operations Scan play Displaying CD titlesRepeat play Scrolling a CD-text titleAdjusting the brightness and tone of color Switching the bandSwitching the VTR system between Ntsc and PAL Visual OperationsCD/MD Changer Operations Selecting a disc from 1 to Scrolling titles MDSelecting an MD Touch the Direct key 1 to 6 and select the desired MDTop function MD When playing a disc 1 toTop function CD Disc repeat playTV Operations TV Operations Seek tuning About DAB programmes Setting the TV diverTV Operations Listening to the DABProgramme scan Switching programmesDigital Radio/DAB Operations AF functionInformation select Information standby modeDigital Radio/DAB Operations TA Traffic Announcement Selecting PTYCancelling an emergency broadcast Operating the PTY Select display when the panel is openPTY preset memory Digital Radio/DAB Operations PTY seekDLS Calling DLS display modeDynamic Label Function Other Functions Mode Number of titlesCD changer mode Number of titles Entering titlesSetting the beep Setting the button illuminationClock Adjustment Factory defaultDSP control function Selecting the Standard mode or the professional modeDSP operations DSP functionsEQ effect ON/OFF DSP operations Woofer level adjustmentDetail adjustment of listening position Selection of listening positionCalling G.EQ Basic Pattern/USER Setting and storing G.EQDSP operations PatternCalling VSE Basic Pattern/USER Pattern DSP operations Calling DSF Basic Pattern/USER PatternVSE effect ON/OFF Press the A-Mbutton to change into the Standard displaySetting and storing VSE Properties/ Memory into User Pattern Calling P.EQ Basic Pattern/USER PatternDVD Operations Center level adjustmentOperation Case of Difficulty DVD OperationsCheck it again Error Displays CD player FM TunerAM Tuner GeneralVRX815 General Cautions Installing the Main Unit Screw Removing the Main Unit Spring into hole a of the hook plate, then pullWire Connection Description TV Tunner Connecting the parking brake lead TTX7501z TTX7503z/TTX7504z MDC655zMDC655z CDC655z/655Tz 1255z/DCZ625CeNET TV Tuner CCA-389Memo