Clarion VRX815 owner manual DSP operations, Calling G.EQ Basic Pattern/USER, DSF effect ON/OFF

				DSP operations
Calling G.EQ BASIC Pattern/USER			6. Press and hold one of [DIRECT] buttons for 2
Pattern
				seconds or longer to store the adjusted G.EQ
1.	Press the [A-M]button to show the AUDIO-			pattern to be USER memory.
	MODE display.		7. To set a title of the stored USER pattern, touch
2.	Touch the [G.EQ BASIC] and [G.EQ USER]			the [TITLE] key to change into the [TITLE IN-
	key to show BASIC pattern selecting display			PUT] key.
	or USER pattern selection/memory display.			∗ For title inputting method, refer to the section
3.	In the pattern selecting display, touch the one			“Entering titles”.
	of pattern key and called the desired G.EQ		8. Press the [A-M]button to change into the
	pattern.			STANDARD display.
	In this display, pressing the No. button in cor-
	respondence to the [DIRECT] key can also call		Standard mode/DSF operations
	the G.EQ pattern.
	∗ After selecting the G.EQ pattern, touch the		DSF effect ON/OFF
	[MEMO] key to copy the selected pattern to the		∗ The factory default setting is “ON”.
	USER pattern.
			1. Press the [A-M]button to show the AUDIO-
	∗ Touch the [EDIT] key to show G.EQ adjusting
				MODE display.
	display, in which the properties of currently se-
				Touch the [DSF ON/OFF] key to select “on”
	lected pattern can be adjusted.	2.
	∗ By pressing the [BAND] button in BASIC pat-			and “off”.
	tern selecting display or USER pattern selec-	3.		Each time the [ON/OFF] key is touched, the
	tion/memory display you can switch between the			on and off statuses are switched alternately.
	two patterns, BASIC and USER.
			4. After the setting, press the [A-M]button again
4.	After the selecting, press the [A-M]button
				or touch the [RTN] key to return to the STAN-
	again or touch the [RTN] key two times to re-
				DARD display.
	turn to the STANDARD display.
			Note:
Setting and storing G.EQ		• If the DSF effect is set to OFF, the adjustment made
			in “DSF operations” is not reflected in the music
Properties/Memory into USER			source.

Pattern

1.Repeat the steps 1 and 2 of the previous pro- cedure (Calling G.EQ BASIC pattern/USER pattern) to show BASIC pattern selecting dis- play or USER pattern selection/memory dis- play.

2.Touch the [EDIT] key to show the G.EQ ad- justing display.

3.When some frequency to be adjusted is se- lected by touching the [ë] key or [•] key (or the frequency key) in the G.EQ adjusting dis- play, a gain setting value at the selected fre- quency is displayed.

There are “50Hz”, “100Hz”, “200Hz”, “400Hz”, “1kHz”, “3kHz” and “12kHz” available for the adjustment frequency.

4.Touch the [w] or [z] key to adjust the G.EQ GAIN. The adjustment range is from -12 dB to +12 dB.

5.After making adjustments to a desired pattern by repeating the operations of items 3 and 4, touch the [RTN] key to change over to the BA- SIC/USER pattern selection/memory display.

English Owner’s manual

VRX815 39