5. INSTALLING THE MAIN UNIT
■Universal Mount
English
1.Place the universal mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the universal mounting bracket inward, then secure the stopper as shown in Figure 6.
2.Wire as shown in Section 8.
3.Insert the main unit into the universal mount- ing bracket until it locks.
4.Mount the outer escutcheon so that all the hooks are locked.
Notes:
1)Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details.
2)Fasten the front stopper securely to prevent the main unit from coming loose.
Installation and Wire connection manual
•Console opening dimensions
(53
Hole
Rear fastening hole (of vehicle) Instrument panel
Screwdriver
Outer escutcheon
Hole
Stoppers
Main unit
Rubber cap
Universal mounting bracket
Stoppers
Note: Set the outer escutch- eon so that its metallic part on the back side fits the upper edge of the main unit.
Figure 6
VRX815 49