DSP operations
English Owner’s manual
Calling DSF BASIC Pattern/USER Pattern
1.Press the
2.Touch the [z] key to select DSF mode. Touch the [DSF BASIC1], [DSF BASIC2] and [DSF USER] key to show BASIC pattern selecting display or USER pattern selection/memory dis- play.
3.In the pattern selecting display, touch the one of pattern key to call corresponding DSF mode.
In this display, pressing the No. button in cor- respondence to the [DIRECT] key can also call the DSF mode.
∗After selecting the DSF mode, touch the [MEMO] key to copy the selected pattern to the USER pattern.
∗Touch the [EDIT] key to show DSF adjusting dis- play, in which the properties of currently selected pattern can be adjusted.
∗By pressing the [BAND] button in BASIC pat- tern selecting display or USER pattern selec- tion/memory display you can switch between the two patterns, BASIC and USER.
4.After the setting, press the
Setting and storing DSF Properties/ Memory into USER Pattern
1.Repeat the steps 1 and 2 of the previous pro- cedure (Calling DSF BASIC Pattern/USER Pattern) to show BASIC pattern selecting dis- play or USER pattern selection/memory dis- play.
2.Touch the [EDIT] key to show the DSF adjust- ing display.
3.Select an item to be adjusted by touching [ITEM] key in the DSF adjusting display.
There are “EFFECT”, “DELAY”, “REAR MIX”, “REVERB TIME” (ROOM SIZE) and “HIGH” (LIVENESS).
4.Touch the [w] or [z] key to set each adjust- ing value.
5.After making adjustments to a desired pattern by repeating the operations of items 3 and 4, touch the [RTN] key to change over to the BA- SIC/USER patterns selection/memory display.
6.Press and hold one of [DIRECT] button for 2 seconds or longer to store the adjusted DSF pattern to the USER memory.
7.To set a title of the stored USER pattern, touch the [TITLE] key to change into the [TITLE IN- PUT] key.
∗For title inputting method, refer to the section “Entering titles”.
8.Press the [A-M] button to change into the STANDARD display.
Professional mode/VSE opera- tions
Note:
•The adjustment made in professional mode is not reflected in the adjustment in standard mode. On the contrary, the adjustment made in standard mode is not reflected in the adjustment in professional mode.
VSE effect ON/OFF
∗The factory default setting is “ON”.
1.Press the
2.Touch the [VSE ON/OFF] key to select “on” and “off”.
3.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.
4.After the setting, press the
Note:
•If the VSE effect is set to OFF, the adjustment made in “VSE operations” is not reflected in the music source.
Calling VSE BASIC Pattern/USER Pattern
1.Press the
2.Touch the [VSE BASIC] and [VSE USER] key to show BASIC pattern selecting display or USER pattern selection/memory display.
3.In the pattern selecting display, touch the one of pattern key to call corresponding VSE pat- tern.
In this display, pressing the No. button in cor- responding to the [DIRECT] key can also call the VSE pattern.
∗After selecting the VSE pattern, touch the [MEMO] key to copy the selected pattern to the USER pattern.
40 VRX815