DSP operations
DSP control function
If the DSP (DPH910), sold separately, is connected to this unit using the CeNET cable, all the func- tions of the DSP can be controlled.
∗DSP control can all be operated only when the panel is open.
●Auto loudness adjustment
Touch the [w] or [z] key to adjust an auto loudness level (0 to 10).
●Woofer out adjustment
Select woofer output out of “STEREO”, “MONO”, or “OFF”.
Touch the select a desire item key to set it.
DSP functions
There are 2 modes available in DPH910, stan- dard mode and professional mode. Choose one of them and adjust the sound field and the sound quality.
●Functions common to each mode:
Such as auto loudness, subwoofer etc.
●Standard mode:
Adjustment using the graphic equalizer function and the DSF (Digital Sound Field) function.
●Professional mode:
Adjustment using the VSE (Virtual Space En- hancer) function and the parametric equalizer function.
∗When the standard mode is selected, adjustment for the professional mode cannot be made. On the contrary, when the professional mode is selected, adjustment for the standard mode cannot be made.
∗For details on functions of each mode, refer to the owner’s manual supplied with the DPH910.
∗Hereafter the graphic equalizer is referred to as a G.EQ, referred to as VSE and the parametric equal- izer referred to as P.EQ.
Operations common to each mode
Output adjustment of auto loudness, subwoofer and playback band
1.Press the [ADJ] button to switch to the adjust- ment selection display.
2.Touch the [z] key two times to select “SOUND”.
Touch the [SOUND] key to change into the Sound adjustment display.
In the Sound adjustment display “AUTO LOUD”,
Touch the [LIST] key to select an item to be adjusted.
3.To make an adjustment on:
●Woofer LPF adjustment
Select woofer LPF slope out of “50Hz”, “80Hz”, “120Hz”.
Touch the select a desire item key to set it.
●HPF adjustment
Select HPF slope out of “50Hz”, “80Hz”, “120Hz”, or “OFF”.
Touch the select a desire item key to set it.
●Test Tone Output
Select Test Tone Output
Touch the select a desire item key to produce a test tone.
4.After adjustment (setting), touch the [RTN] key to return to the adjustment selection display.
5.Press the [ADJ] button again or touch the [RTN] key to return to the STANDARD display.
Selecting the Standard mode or the professional mode
∗The factory default setting is “STANDARD”.
1.Press the [ADJ] button to switch to the adjust- ment selection display.
2.Touch the [z] key two times to select “AC PROCESSOR”.
Touch the [AC PROCESSOR] key to select “PRO” and “STANDARD”.
3.Touch the [PRO] or [STANDARD] to select a desired mode and to set the mode thus se- lected.
4.After setting, press the [ADJ] button again to return to the STANDARD display.
English Owner’s manual
VRX815 37