English Owner’s manual
DSP operations
Setting and storing P.EQ Properties/Memory into USER Pattern
1.In the Basic adjustment display or in the User setting display, press the
2.Touch the [EDIT] key to show the P.EQ adjust- ing display.
3.Select an item to be adjusted by touching [ITEM] key in the P.EQ adjusting display.
4.Touch the [ITEM] key to set each adjusting value.
The P.EQ adjustment contents are as follows:
●“FRONT/REAR”
●“BAND”
Select the channel to be compensated (front or rear).
●“FREQUENCY”
Select the center frequency that you want to compensate from the range of 20 Hz to 20 kHz. (1/3 octave step, 31 points)
●“GAIN”
Adjust the gain (output level) in the range of - 12 dB to +12 dB. (1 dB step, 25 points)
●“Q”
Set the sharpness of the
5.After making adjustments to a desired pattern by repeating the operations of items 3 and 4, touch the [RTN] key to change over to the BA- SIC/USER pattern selection/memory display.
6.Press and hold one of [DIRECT] button for 2 seconds or longer to store the adjusted P.EQ pattern to the USER memory.
7.To set a title of the stored USER pattern, touch the [TITLE] key to change into the [TITLE IN- PUT] key.
∗For title inputting method, refer to the section “Entering titles”.
8.Press the [A-M] button to change into the STANDARD display.
DVD Operations
Operation
●Play/Still operation
Pressing and holding the [s] button for about 1 second or longer switches to the desired mode (play, still (pause)).
Each time the button is pressed and held for about 1 second or longer, the mode is switched sequen- tially.
When the [d] button is kept pressed during the still mode, slow play (1/2 play) is performed so far as the button is pressed.
●Chapter up/down operation (FF/FB opera- tion)
Press the right side of [SEARCH] button for 1 sec- ond or shorter to increment chapters.
Hold down the right side of [SEARCH] button for 1 second or longer to fast forward.
Press the left side of [SEARCH] button for 1 sec- ond or shorter to decrement chapters.
Hold down the left side of [SEARCH] button for 1 to fast backward.
Woofer level adjustment
You can adjust an output sound level of subwoofer.
1.Press the
2.Touch the [WOOFER VOL] key to show the woofer level adjusting display.
3.Touch the [w] or [z] key to adjust the level
4.After adjustment, touch the [RTN] key to re- turn to the STANDARD display.
Center level adjustment
You can adjust an output sound level of center speaker.
1.Press the
2.Touch the [CENTER VOL] key to show the center level adjusting display.
3.Touch the [w] or [z] key to adjust the level (0 to
4.After adjustment, touch the [RTN] key to re- turn to the STANDARD display.
Adjusting the balance and fader
1.Press the [A-M] button to change into the AU- DIO-MODE display.
42 VRX815