Integra DSR-7.3 Power on/ready function, Direct change function, Program Timer, Sleep Timer

zConnection for the Integra/Onkyo Cassette Tape Deck, CD Recorder or MD Recorder

The z terminal on the DVD Receiver is for connecting Integra/Onkyo MD recorder, CD recorder or Cassette tape deck equipped with the same z terminal. When an Integra/Onkyo component is z -connected, you can point the remote controller supplied with the DVD Receiver at the sensor on the DVD Receiver and operate that component without having to switch remote controllers. In addition, by connecting components to the z terminal, you can also perform the system operation given below.

To connect components using the z terminal, simply connect a z cable from this z terminal to the z terminal of the other component. An z cable with a 3.5 mm (1/8 inch) miniature two-conductor plug comes with every cassette tape deck, compact disc recorder and MD recorder that has an z terminal.

Integra/Onkyo Cassette tape deck/CD recorder/MD recorder

Power on/ready function

When the DVD Receiver is in the standby state, if an z-connected component is turned on, then the DVD Receiver also turns on and the input source selected at this unit automatically switches to that component.

Direct change function

When the play button is pressed on an z-connected component, the input source selected at the this unit automatically changes to that component.

Program Timer

You can operate timer playback and recording using this unit.

Sleep Timer

You can fall asleep to a music/radio program using the timer.

Power off function

When the DVD Receiver is placed in the standby state, all z- connected components are automatically put in standby mode.

Note

Please change the name displayed by the input selector to match the connected component (see ‘Changing the “TAPE” display to match the connected source’ on page 38).

zcable

L

R

ANALOG

OUTPUT

Be sure to connect using the audio connection cable.

			L		ANTENNA
PREOUT				IR
AUDIO
			REMOTE	IN
			CONTROL
			R	AM	FM 75
SUB	IN	OUT	IN
WOOFER	TV/LINE	MD/CDR/TAPE
DIGITAL			VIDEO OUTPUT

YPBPR

OPTICAL

OUT IN S VIDEO VIDEO COMPONENT

SURROUND		FRONT SPEAKERS
SPEAKERS					AC INLET
R	L	R	CENTER	L

Notes

•Connect the plugs securely.

•Be sure to connect to the z connectors using the z cable.

•For remote control operation, the audio connection cables must also be connected.

•If a component has two z terminals, you can use either one to connect to the DVD Receiver .

•Do not connect the DVD Receiver’s z connector to any component other than an Integra/Onkyo product. It may cause malfunction.

•Certain component models may not be able to control this unit.

20