Integra DSR-7.3 instruction manual Adjusting the Video Quality, Selecting a preprogrammed setting

Customizing the Function Settings

Adjusting the Video Quality

You can either select a preprogrammed setting designed to match certain program types or make adjustments to match your own preferences and save them in the DVD receiver’s memory.

Make changes to the [Video Adjust] setting in the Setup screen Video 2 menu.

V1	Video2	Language	General
		Background — Gray
		Video Adjust	Start
	Picture Quality Controls
		Move	SETUP	Exit

■Selecting a preprogrammed setting

1Use the cursor button (3) to select [Start] then press

ENTER.

Setting items vary depending on the settings in the Setup screen Video 1 menu.

Interlace Video Memory Select

Interlace Video Setup

2 Press ENTER.

Standard Cinema Animation

P.Memory 1 P.Memory 2 P.Memory 3

Standard (Factory Setting)

Presents the video with no effect added.

Cinema

Delivers a cinema-like picture.

Animation

Provides images with bright clear colors.

Memory 1, Memory 2, and Memory 3 (P.Memory 1, P.Memory 2, and P.Memory 3)

These are user programmable settings. See “Adjusting the picture quality settings” on this page and page 71 for more

information.

3Use the cursor buttons (2/3/5/∞) to select one of the preprogrammed picture quality settings.

If there is a DVD or Video CD playing, the effects of each setting can be viewed while it is highlighted on the screen. This may be useful in selecting an appropriate setting.

4Press ENTER.

The new selection is set.

Notes

•Each picture quality setting is defined by a number of individual settings, described in “Adjusting the picture quality settings” on this page and page 71.

•Depending on the disc and the TV/monitor, you may not see the effect clearly.

■Adjusting the picture quality settings

– To create your own setting (1)

1Use the cursor button (3) to select [Start] then press

ENTER.

Interlace Video Memory Select

Interlace Video Setup

2Use the cursor button (∞) to select [Video Setup] then press ENTER.

Interlace Video Memory Select

Interlace Video Setup

3Use the cursor buttons (2/3) to select the setting to [On] or [Off].

DNR	off		max
Move	ENTER Select	DISPLAY Check

4Use the cursor buttons (5/∞) to select the setting to adjust.

You can adjust any or all of the following picture quality factors:

<When set to [Progressive] or [Auto Progressive] in the Setup screen Video 1 menu.>

DNR

Controls the amount of signal noise in the luminance component of the video signal.

Sharpness

Adjusts the sharpness of the mid-frequency (less detailed) elements in the picture. (This setting is only effective when [Fine Focus] is [On].)

Detail

Switch on to reveal greater detail (higher resolution) in the picture.

Chroma Delay

Adjusts how saturated colours appear.

Gamma

Adjusts the brightness of the darker images in the picture.

Prog. Memory

Program the current settings.

*

Expert

denotes more detailed settings. If the item is not displayed, please refer to page 67 to display it.

70