Integra DSR-7.3 Switching the timer on or off, Case of overlapping timer settings

7-2

ENTER

«

ENTER

8	S
	tandby

EVERY recording:

Set the day.

To change the day of week setting:

Press (2/3) so that the desired day blinks.

Press (5/∞) to select/deselect the day.

Press ENTER to confirm the setting. The timer indicator lights up.

Set the power to Standby.

Press Standby to put the system into standby mode.

•The muting function activates during timer recording. If you would like to monitor the sound during recording, press Muting on the remote to cancel the muting function.

Caution

•Even if the record timer is set to sure the timer, the timer will not operate unless the power is set to the standby mode. Make sure the system is in standby mode.

Sen d

		On	S			Standby
/Close			tandby		ght
pen					Li
O
		Input	l
			Se ector		2
		Mode
		Recvr	Tape
DVD					TV
	Dimmer		Display
ep					Clo
Sle					ck
		Menu	Men	u
	Top
Tun						5/∞
Step/Slow
CH		ENTER			VOL
	R	eturn	etup t
T-D/ST			TSVInpu		Muting
Surround			A.Control
Repeat					A-B
Late Night					Timer	Timer
Audio		Angle	Subtitle		FM Mode
Last M	Program		Random		Clear
SP Setup		Test Tone			CH Sel
1			2		3
SW Mode		Distance
4			5		6
IPM		T-D Setup Up/Down
7			8		9
+10			0		Search
-- / ---					Enter

RC-507M

Switching the timer on or off

•Use when you want to cancel an active timer setting, reset a canceled timer, or when you want to revise a record timer.

•If the current time is not set, you cannot preset the timer.

1 Timer	Repeatedly press Timer to select
	the desired timer type.
	The Timer indicator at the top of the display
	lights up when the respective timer is set.

2	Use (5/∞) to switch the timer on or
	off.

Approx. 2 seconds after switching the

ENTER timer, the previous screen will reappear.

or

Caution

Pressing ENTER, activates the start time (etc.) setting mode.

■In the case of overlapping timer settings

Active

WEEKDAY

	REC	Canceled
				Active
WEEKEND
Time	9:00	10:00	11:00	12:00
	»	»	»	»
	on	off	on	off

•When the power is turned on during timer playback, even if you set another timer, it will not be activated. The initial timer is canceled when the standby mode is initiated.

•If WEEKDAY timer end time and the REC timer start time are set to the same time, the REC timer will not activate. Please all a one-minute difference end time and start time of each times.

•If two or more ONCE / WEEKDAY / WEEKEND / REC are

set to the same timers start times are given the following priority: ONCE → WEEKDAY → WEEKEND → REC.

•If the REC timer is deactivated because the power is already on (etc.), the TIMER indicator does not light in the display and the timer settings are cancelled.

•If the power is already on when a timer’s start time occurs and there is another overlapping timer, the second timer will not operate. The power turns off automatically at the end time of the first timer.

45