Crown XTI 6002, XTI 2002 Front Panel Navigation, Menu Tree, Navigating the LCD Screen Menu Basics

XTi2 Series Power Amplifiers

Front Panel Navigation

From the front panel, you can change settings for several of the amplifier’s integrated signal processing features: Input Y, Crossover Frequency, EQ, Delay, Limiting, and Stereo/Bridge-Mono. The Icons in the display illuminate to show which features are currently applied and turned on.

When you power-on the amplifier for the first time, the LCD screen displays “DSP OFF” (no DSP is applied). Subsequent power-ons display the preset that was active when you last shut off the amplifier.

The figure below shows the Menu Tree, which is the navigation path of options in the Menu. It shows how you navigate through the front panel and which settings are available from the front panel. For full access to all features, it is required that you hook up the amplifier via USB to a computer and run either HiQnet System Architect™ or Band Manager™ software. Both are available free via download from the following address: http://hiqnet.harmanpro.com.

Menu Tree

Power-up

CURRENT PRESET

Sel

Next or Prev

FLASHING “PRESET” TEXT FLASHING “CONFIG” TEXT

Sel Sel

FLASHING “PRESET” ICON	Next
Sel	DSP PROCESSES					Press Next to see
				CH1+CH2
	(ICONS on screen)	Y Next				each processor’s
				INPUT Y		options, then press
		Sel		STEREO		Sel to select an option.
PRESETS		XOV Next		OFF, 90 Hz, 100 Hz, 1200 Hz,
(TEXT on screen)
		Sel		1500 Hz, 2000 Hz, 2-CH SUB,
				CUSTOM
DSP OFF				Next	EQ OUT
	EQ Ch. 1
Next					EQ IN
		Sel		Prev
BRIDGE
Next				Next	EQ OUT
	EQ Ch. 2
XOVER					EQ IN
		Sel		Prev
Next
BRG SUBS	DELAY Ch. 1		Next		CURRENT, OFF, 50, 40, 30,
Next
		Sel			20,10, 9, 8, 7, 6, 5, 4, 3, 2, 1
SUB SYNTH
Next	DELAY Ch. 2		Next		CURRENT, OFF, 50, 40, 30,
USER PRESETS					20,10, 9, 8, 7, 6, 5, 4, 3, 2, 1
		Sel
6-50

	Next				Next
							CURRENT, OFF, –0.5 dB,
			LIM Ch. 1
	Sel						–1.0 dB, –1.5 dB... –40 dB
				Sel
Doing nothing returns you to the
					Next
							CURRENT, OFF, –0.5 dB,
CURRENT PRESET after a timeout delay.			LIM Ch. 2
							–1.0 dB, –1.5 dB... –40 dB
Starting from the CURRENT PRESET,				Sel
						Next
Sel > Sel > Next goes to presets.								BRIDGE
		STEREO/BRIDGE MONO
Sel > Next > Sel lets you				Sel				STEREO
						Prev
configure the DSP processes.

Navigating the LCD Screen Menu: Basics

To step through the Menu options, press the Sel, Next or Prev buttons as described in the menu tree above. Icons illuminated at the top of the screen show which DSP functions are active with the current preset.

When you are modifying a preset, its icon flashes. You can scroll through its settings with the Prev and Next buttons.

When you see the desired setting, select it by pressing Sel. Doing nothing returns you to the current preset after ten seconds.

In the LCD screen, if the Preset Icon is lit, the current preset is unchanged from its stored settings. If the Custom Icon is lit, the current preset has been changed from its stored settings.

page 10 Operation Manual