Crown XTI 1002, XTI 2002, XTI 4002, XTI 6002 XTi2 Specifications, Performance, Construction, Weight

Page 43

XTi2 Series Power Ampliﬁers

XTi2 Specifications

Minimum Guaranteed Power, 1 kHz

XTi 1002

XTi 2002

XTi 4002

XTi 6002

Per channel, both channels driven

Stereo, 2 ohms (per channel)	700W	*†	1,000W	*	1,600W	*	3,000W*
Stereo, 4 ohms (per channel)	500W		800W		1,200W		2,100W
Stereo, 8 ohms (per channel)	275W		475W		650W		1,200W
Bridge-Mono, 4 ohms	1,400W	*†	2,000W	*	3,200W	*	6,000W*
Bridge-Mono, 8 ohms	1,000W		1,600W		2,400W		4,200W

With 0.5% THD. *With 1% THD. † Not rated for 100V versions.

Performance

Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4 V.

Frequency Response (at 1 watt into 4 ohms, 20 Hz to 20 kHz): +0 dB, –1 dB.

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted: 100 dB (103 dB in XTi 6000).

Damping Factor (8 ohm) 10 Hz to 400 Hz: > 500.

Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB.

Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.

Input Stage: Input is electronically balanced and employs precision 1% resistors.

AC Line Current (120VAC ampliﬁer playing 1/8 power pink noise into 4 ohms per ch):

XTi 1002: 6.8A, XTi 2002: 8.3A, XTi 4002: 10.5A; at idle draws no more than 30 watts.

XTi 6002: 15.3A; at idle draws no more than 180 watts.

Voltage Gain (at 1 kHz, 8 ohm rated output): XTi 1002: 30.5 dB. XTi 2002: 32.9 dB. XTi 4002: 34.2 dB.

XTi 6002: 37.1 dB.

Maximum Imput Signal: +22 dBu typical.

Load impedance (note: safe with all types of loads)

Stereo: 2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions).

Bridge-Mono: 4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions).

AC Line Voltage and Frequency Conﬁgurations Available (± 10%): 100V, 120V, 220-240V 50/60 Hz.

Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).

Construction

Ventilation: Flow-through ventilation from front to back.

Cooling: Heat sinks and proportional-speed fan.

Dimensions. Width, Height, Depth (behind mounting surface):

EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D. XTi 6000 is 16.2 in. (41.15 cm) D.

Weight

Net Weight, Shipping Weight: 18.5 lb (8.4 kg), 21.5 lb (9.8 kg). XTi 6002 is 24.0 lb (10.9 kg), 30.0 lb (13.6 kg).

Operation Manual

page 43

Image 43

Contents Some models may be exported under the name Amcron XTiXTi2 Series ampliﬁers require Class 2 output wiring Important Safety InstructionsDeclaration of Conformity Get Started Factory Preset #2 BridgeStereo DSP Off Factory Preset #4 BRG Subs Factory Preset #3 XoverBefore you get started ensure that you Factory Preset #5 SubsynthGet Started Ensure Proper CoolingHow to Use This Manual Next Generation Features includeWelcome Indicators Front Panel FeaturesXTi 1002, 2002 Back Panel FeaturesXTi Menu Tree Front Panel NavigationNavigating the LCD Screen Menu Basics Integrated Processing Features /PSNBM &BSMZ VMM4QFFE Advanced Thermal ControlAdvanced Monitoring Front Panel Lock-OutXTi2 Serie Bedienungsanleitung Stereo DSP AUS InbetriebnahmeWerksvoreinstellung Nr Brücke Werksvoreinstellung Nr BRG Subs Werksvoreinstellung Nr XoverBevor Sie beginnen, stellen Sie sicher, dass Sie InbetriebnahmeWerksvoreinstellung Nr Subsynth Stellen Sie eine korrekte Kühlung sicherDie Sie und die Welt bewegt Die Features der nächsten GenerationWillkommen Verwendung dieser BedienungsanleitungFeatures der Vorderseite Features der Rückseite Navigation durch das Menü des LCD-Bildschirms Grundlagen Navigation auf der VorderseiteMenübaum Equalizing Integrierte VerarbeitungsfunktionenEingangsmodus Ausgangsmodus /PSNBM 7PSFJUJH Údituesfibim Sperre der Tasten der VorderseiteAlgunos modelos pueden ser exportados bajo el nombre Amcron Serie XTi2 Manual de OperaciónPreajuste de fábrica núm Bridge Puente Cómo empezarPreajuste de fábrica núm Xover Divisor DE Frecuencia Preajuste de fábrica núm BRG Subs SUB-BAJOS PuenteadosAntes de empezar, debe asegurarse de Cómo empezarCompruebe que existe una ventilación correcta Preajuste de fábrica núm Subsynth Sintetizador subarmónicoLas funciones de nueva generación son BienvenidoCómo usar el presente manual Funciones del panel frontal Funciones del panel posterior Menú de opciones Navegación del panel frontalFunciones de procesamiento integradas Bloqueo del panel frontal Limitador PeakX PlusControl térmico avanzado Controles avanzadosCertains modèles peuvent être exportés sous le nom d’Amcron Manuel d’utilisation de la série XTi2Commencez Stéréo DSP mode OffPréréglage usine #2 Bridge Préréglage usine #4 BRG Subs Préréglage usine #3 XoverAvant de commencer, assurez-vous CommencezPréréglage usine #5 Subsynth Vériﬁer le fonctionnement du refroidissementPEQ pour une personnalisation du fonctionnement BienvenueLes caractéristiques nouvelle génération comprennent Comment utiliser ce manuelCaractéristique panneau avant Connecteur USB HiQnet Caractéristiques panneau arrièreVentilateurs Prises de sortie 4 pôles SpeakonMenu Fonctionnalités panneau avantNaviguer dans le menu de lécran LCD Pour commencer Égalisation Mode dentréeMode de sortie Caractéristiques de traitement intégréesContrôle thermique perfectionné Commande perfectionnéeVerrouillage panneau avant Performance XTi2 SpecificationsWeight Dimensions. Width, Height, Depth behind mounting surfaceService at a US or Canada Service Center Factory Service ServiceWorldwide Service US and Canada ServicePacking Instructions Payment of Non-Warranty RepairsEstimate Approval Summary of Warranty Warranty United States & CanadaWarranty Worldwide Except USA & Canada This page Intentionally Left Blank IT8000, CDi1000, PCC16 Crown Audio, IncXTi2 Series Power Ampliﬁers Name on credit card Billing address of credit card Crown Audio Factory Service InformationType of credit card MasterCard Visa American Express Card # Exp. date *Card ID #