Toshiba E6580772 Safety Precautions, „ Handling in general, „ Transportation and Installation

Page 2

E6580772

Safety Precautions

On the inverter and in its instruction manual, important information is contained for preventing injuries to users and damages to assets and for proper use of the device. Read the instruction manual attached to the inverter along with this instruction manual for completely understanding the safety precautions and adhere to the contents of these manuals.

„Handling in general

 

Danger

 

▼ Never disassemble, modify or repair the inverter.

Never

Disassembling the inverter could cause electric shocks, fire or injuries.

Disassemble

Request your TOSHIBA dealer for repairs.

Do not remove connectors when the power is on. It could lead to electric shocks.

 

▼ Do not put or insert foreign objects such as waste cable, bars, or wires into the inverter.

Prohibited

It could lead to electric shocks or fire.

Do not splash water over the inverter. It could lead to electric shocks or fire.

Wiring should be conducted after turning the inverter power off.

Turn off the power immediately in case any abnormalities such as smokes, smells or

Mandatory

abnormal noise are found.

Neglect of these conditions could lead to fire.

 

 

Ask your TOSHIBA dealer for repairs.

„Transportation and Installation

 

Danger

 

▼ Do not install or operate the inverter if it is damaged or any part is missing from it.

 

Operating the inverter in a defective condition could lead to electric shocks or fire.

 

Ask your TOSHIBA dealer for repairs.

Prohibited

▼ Do not put any inflammable material near the inverter.

It could catch fire if the inverter sparks because of a breakdown and the like.

 

▼ Do not install the inverter where it could be splashed with water and the like.

 

It could lead to electric shocks or fire.

 

 

 

Inverter must be used under environmental conditions prescribed in this

 

instruction manual.

Mandatory

Using the inverter under conditions not specified by the instruction manual could lead

 

to breakdown.

 

 

1

Image 2
Contents Optional add-on cassette E6580772③„ Handling in general Safety Precautions„ Transportation and Installation „ About disposal of Inverter „ Wiring„ About operation < Type of F10M option unit > < Confirmation on accessories >Introduction Contents Name and function of each section AppearanceE6580772③ Name of each section terminal TLF001ZConnection to the inverter <When the unit is installed alone><When the unit is installed with another option> Connection to the inverter„ Connection with options E6580772③ Wiring „ PG interface TB2 terminalConnection of transmission cable Functional descriptionF10M communication function Setting of communication parameters Communication parameters „ F10M communication parametersE6580772 ③ „ Other parameters PG input setting E6580772③ Vector control with sensorConnection of PG ↑V aInverter Selection of encoder type 100mExtended Parameter Vector control setting parameterBasic parameters Speed loop ratio gain Speed loop integration gainMonitoring method for feedback amount Setting method for status monitoringSetting method for analog monitoring Accuracy of speed controlExternal diagram PG feedback specification SpecificationEnvironment Specification Specifications of transmission Warranty