Novatel DL-V3 user manual Mettemp Specify Air Temperature, Mettemp Default Configuration

B.31 METTEMP Specify Air Temperature

The mettemp command allows you to specify ambient temperature. Temperature specified with the mettemp command does not affect receiver operation. Rather, it allows you to create a record of atmospheric conditions for post-processing purposes.

The mettemp set command specifies air temperature at temp. This command only stores the temperature in volatile memory, and does not automatically generate a record. The temperature can then be displayed/recorded by requesting the met log.

The mettemp clear and the mettemp default commands clear the temperature setting.

The mettemp default command clears the temperature setting.

Syntax

mettemp set [temp] mettemp defaultclear

Message ID = 165

	Field	Data	Value Used if	Bytes	Format	Units	Offset
			Not Specified
1		Header			-	-	0
2		Parameter Update, see Table 34		4	Enum	none	H
		on Page 107
3		Temperature	0	4	Float	Celsius or	H+4
						Fahrenhei
						t a

a.You may use Celsius or Fahrenheit in your float input, depending on your preference

Table 51: METTEMP Default Configuration

Parameter	Power-On	Freset	Stored in NVM
metpress	clear	clear	NO

DL-V3 User Manual Rev 3 129