Novatel DL-V3 user manual Chapter DL Explorer, Logs Tab

Chapter 4 DL Explorer

groups you defined, and the preset POWERUP group provided by DL Explorer. The POWERUP group can be modified from the software, see Section , Preset POWERUP Group, on Page 60.

Edit a group name by clicking on it directly in the left side panel. Add a new group using the

button, remove a group using the button or duplicate a group using the button. Group names are converted to all uppercase lettering.

The default group name (other than the preset POWERUP group name) is GROUPX where X is the next possible number to make the name unique in the DL Groups dialog (for example, GROUP1). The group name can be changed but must be unique. Group names can be up to eight characters long but the first character of the name cannot be a number.

A receiver group consists of information in five tabs:

• Logs	See the Logs Tab section on Page 58
• Position	See the Position Tab section on Page 60
• Site	See the Site Tab section on Page 61
• Interface	See the Interfaces Tab section on Page 63
• COM Port	See the Ports Tab section on Page 64

Click the OK button to save your changes or the Cancel button to discard your changes and return to the main DL Explorer window.

Logs Tab

To add a log to a group, select the Logs tab.

Figure 20: Add Log

Select a log from the Name drop down box.

58 DL-V3 User Manual Rev 3