Novatel DL-V3 Project Add or Clear a Project, Project Action, Project Default Configuration

B.32 PROJECT Add or Clear a Project

The project command allows you to add or clear a project. If a project has been added via the project command prior to issuing a groupuse start command, a projectdefb log is automatically logged to the default group destination by the groupuse start sequence.

Project add defines a project with parameters project, agency and observer.

Project clear undefines a project, and prevents the projectdefb log from being logged to the default group destination by the groupuse start sequence.

Syntax

project add project [agency [observer]]

project clear

Message ID = 211

Field		Data		Value Used if		Bytes	Format	Units	Offset
				Not Specified
1	Header			-			-	-	0
2	Project Action, see Table 52			-		4	Enum	none	H
3	Project			-		32	Char[]	none	H+4
4	Agency			NUL		32	Char[]	none	H+36
5	Observer			NUL		32	Char[]	none	H+68
			Table 52:		Project Action
		Binary Value	ASCII Value			Description

0

1

ADD	Add a new project into the PDC (default)
CLEAR	Clear projects from the PDC

Table 53: PROJECT Default Configuration

Parameter	Power-On	Freset	Stored in NVM
project	clear	clear	NO

130 DL-V3 User Manual Rev 3