Pioneer PRS-D1200M owner manual Connection Diagram, Speaker connection instructions

Page 8

Connecting the Unit

Connection Diagram

•This diagram shows connections using external output. Slide the input switch to the left (RCA).

•In the case of connecting the external output from a car stereo to an RCA input, use the jack used for full- range output. This is because the LPF of the amplifier cannot be turned OFF. If this jack cannot be used, connect the subwoofer output jack to the RCA input.

•When you connect with speaker output, connections defer from the diagram. For details, see the “Using the Speaker Input” section. In either case, you need to set the input switch. For details, see the “Setting the Unit” section.

Grommet

Fuse (40 A) ⋅ 2

Bass Boost

Remote Control

6 m (19 ft. 8 in.)

Special red battery wire [RD-228] (sold separately) After making all other connections at the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery.

Ground wire (black) [RD-228] (sold separately) Connect to metal body or chassis.

Car stereo with

RCA output jacks

External Output

Jack for the bass boost remote control Connect this jack and the bass boost remote control with the bass boost remote control wire.

Connecting wire with RCA pin plugs (sold separately).

RCA input jack

SYNC OUT/SYNC IN jack See the “Connecting the Speaker Wires” section for SYNC OUT- PUT/SYNC INPUT jack con- nection instructions.

7

 

Speaker output terminal

Fuse (40 A) ⋅ 2

See the “Connecting the Speaker Wires” section for

speaker connection instructions.

System remote control wire (sold separately)

Connect the male terminal of this wire to the system remote control terminal of the car stereo (SYSTEM REMOTE CONTROL). The female terminal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control terminal, connect the male terminal to the power terminal through the ignition switch.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PRS-D1200M Contents Before Using This ProductAbout This Product Information to UserVisit our website Setting the Unit Mode Select Switch Input SwitchPower Mode Switch Gain ControlSetting the Gain properly Gain Control of This UnitConnecting the Unit To prevent damage and/or injurySpeaker connection instructions Connection DiagramSystem remote control wire sold separately Connecting the Power Terminal Battery Wire and Ground Wire SizeConnections when using the speaker input Connecting the Speaker Output TerminalsUsing the Speaker Input Connecting the Speaker Wires Single AmplifierSpeaker Connect to a car stereoTwo Amplifier Ex. Bridge Two AmplifierMode Select switch Mode Select switch must be Sync INV positionFour Amplifier Ex. Bridge Must be in Master positionMode Select switch For details, see Connecting wire with Sync in RCA pin plugs sold To 8 ΩFour Amplifier To 8 ΩInstallation To prevent malfunction and/or injuryAttaching the bass boost remote control Example of installation on the floor mat or on the chassisReplacing the top cover Screw Top Cover Tapping-screwsSpecifications Service après-vente pour un produit Pioneer Table des matièresAvant d’utiliser cet appareil Etats-UnisVisitez notre site Web Quelques mots concernant cet appareilCommande de l’accentua- tion des graves Réglage de l’appareilTémoin ’alimentation Sélecteur infrasonoreCommutateur Mode Select Commande du gainCommande de la fréquence de coupure pour LPF Commutateur Power ModeCommande du gain de cet appareil Réglage correct du gainRaccordement de l’appareil Pour éviter toute anomalie ou blessure’allumage Schéma de raccordementFusible 40 a ⋅ Raccordement de la borne d’alimentation De masseConnexion lors de l’utilisation de l’entrée de haut-parleur Utilisation de l’entrée de haut-parleurRaccordement des bornes de sortie vers les haut-parleurs Connexion des câbles des haut-parleurs Amplificateur uniqueDeux amplificateurs Doit être sur la position MasterLe commutateur Mode Select La section Schéma deRaccordement À 16 ΩÀ 8 Ω Doit être sur la position Sync Quatre amplificateursDoit être sur la position Sync ’installez pas l’appareil Pour éviter toute anomalie de fonctionnement ou blessureFixation de la télécommande d’accentuation des graves Remise en place du couvercle supérieurCaractéristiques techniques Contenido Antes de usar este productoServicio posventa para productos Pioneer EE.UUVisite nuestro sitio Web Sobre este productoAjuste de esta unidad Control de refuerzo de gravesCubierta superior Interruptor selector subsónicoInterruptor Mode Select Interruptor Power ModeControl de ganancia Control de frecuencia de corte para LPFConfiguración apropiada de la ganancia Control de ganancia de esta unidadConexión de la unidad Para evitar daños y/o lesionesDiagrama de conexión Instrucciones de conexión de laToma Sync Output / Sync Terminal de salida de altavozTamaño del cable de batería y cable de puesta a tierra Conexiones de terminales sin soldaduraConexión del terminal de alimentación Conexión del terminal de salida de altavoz Uso de la entrada de altavozConexión de los cables de altavoces Amplificador simpleA 8 Ω Dos amplificadores Puente externoDos amplificadores El interruptor Mode Select De automóvil. Para los Conexión del cable conConexión del cable de altavoz Vendido separadamenteEl interruptor Mode Select Para los detalles, consulte la El interruptor Mode SelectCuatro amplificadores Debe estar en la posición SyncInstalación Para evitar fallas de funcionamiento y/o lesionesRecolocación de la cubierta superior CubiertaEspecificaciones Pioneer Corporation Å„ÛÓ 1-óÓÏÂ, å„ÛÓ-ÍÛ, íÓÍËÓ 153-8654, üÔÓÌËfl

PRS-D1200M specifications

The Pioneer PRS-D1200M is a powerful and versatile monoblock amplifier designed for car audio enthusiasts seeking premium sound performance. With a sleek and compact design, it seamlessly integrates into various vehicle setups, making it an ideal choice for those looking to enhance their in-car audio experience.

One of the standout features of the PRS-D1200M is its impressive power output. This amplifier can deliver up to 1200 watts of maximum power, allowing it to drive subwoofers with ease and produce deep, rich bass that truly enhances music enjoyment. Its RMS power rating stands at 600 watts at a 2-ohm load, ensuring a reliable and consistent performance even during prolonged use.

The PRS-D1200M incorporates advanced technologies to ensure high-quality sound reproduction. One such feature is its Class D amplifier design, which not only boosts efficiency but also minimizes heat generation. This design allows for a smaller and lighter unit, making installation easier while still delivering robust audio performance. Additionally, the amplifier is equipped with a high-pass filter, low-pass filter, and subsonic filter, enabling users to fine-tune the sound output according to their personal preferences and audio setup.

Another key characteristic of the PRS-D1200M is its high-quality build. The sturdy construction of the amplifier ensures durability and can withstand the rigors of automotive applications. The unit also features a sophisticated thermal management system, which helps to prevent overheating and maintains optimal performance levels.

Installation of the PRS-D1200M is made user-friendly with its well-organized layout and clear labeling of input and output connections. The amplifier is compatible with various audio sources, making it a versatile addition to any car audio system. The product also offers adjustable gain control that allows users to optimize the output level based on their specific audio requirements.

In conclusion, the Pioneer PRS-D1200M combines power, performance, and customization options in a compact and durable package. Its advanced features and technologies make it an excellent choice for anyone looking to elevate their car audio system with a reliable monoblock amplifier that delivers exceptional sound quality and powerful bass response. Whether you’re an audiophile or a casual listener, the PRS-D1200M stands out as a top contender in the automotive audio market.
Top Page Image Contents