Pioneer PRS-D1200M owner manual Specifications

Page 17

Specifications

Power source

14.4 V DC (10.8 V to 15.1 V allowable)

Grounding system

 

Negative type

Current consumption

39 A (at continuous power, 4 Ω)

Average current drawn*

12 A (4 Ω for one channel)

 

 

20 A (2 Ω for one channel)

 

 

28 A (1 Ω for one channel)

Fuse

 

40 A ⋅ 2

Dimensions

301 (W) mm ⋅ 57 (H) mm ⋅ 213 (D) mm

 

[12 (W) in. ⋅ 2-1/4 (H) in. ⋅ 8-3/8 (D) in.]

Weight

3.5 kg (7.7 lbs.) (Leads for wiring not included)

Maximum power output

800 W ⋅ 1 (4 Ω) / 1 200 W ⋅ 1 (1 Ω to 2 Ω)

Continuous power (14.4 V)

NORMAL mode: 4 Ω, 20 Hz to 240 Hz,

1.0% THD, 400 W ⋅ 1

 

 

2 Ω, 100 Hz,

1.0% THD, 600 W ⋅ 1

 

HI-CURRENT mode: 4 Ω, 20 Hz to 240 Hz,

1.0% THD, 150 W ⋅ 1

 

 

2 Ω, 100 Hz,

1.0% THD, 300 W ⋅ 1

 

 

1 Ω, 100 Hz,

1.0% THD, 600 W ⋅ 1

Load impedance

4 Ω (1 Ω to 8 Ω allowable)

Frequency response

10 Hz to 240 Hz (+0 dB, –3 dB)

S/N ratio

 

92 dB (IHF-A network)

Distortion

 

0.5 % (10 W, 100 Hz)

Low pass filter

Cut off frequency: 40 Hz to 240 Hz

 

 

Cut off slope: –18 dB/oct

Subsonic filter (HPF)

 

Frequency: 20 Hz

 

 

 

Slope: –18 dB

Bass boost

 

Frequency: 50 Hz

 

 

 

Level: 0 / 6 / 9 / 12 dB

Gain control

 

RCA: 400 mV to 6.5 V

 

 

 

SP: 1.6 V to 26 V

Maximum input level / impedance

 

RCA: 6.5 V / 22 kΩ

 

 

 

SP: 26 V / 90 kΩ

 

 

 

Power output

NORMAL mode: 400 W RMS ⋅ 1 channel

 

 

(at 4 Ω and

1% THD+N)

 

 

600 W RMS ⋅ 1 channel

 

 

(at 100 Hz , 2 Ω and

1% THD+N)

 

 

HI-CURRENT mode: 150 W RMS ⋅ 1 channel

 

 

(at 4 Ω and

1% THD+N)

 

 

300 W RMS ⋅ 1 channel

 

 

(at 100 Hz , 2 Ω and

1% THD+N)

 

 

600 W RMS ⋅ 1 channel

 

 

(at 100 Hz , 1 Ω and

1% THD+N)

 

S/N ratio

66 dBA (reference: 1 W into 4 Ω)

 

 

 

 

 

Note:

•Specifications and the design are subject to possible modification without notice due to improvements.

*Average current drawn

•The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ

16

Page 16 Page 18
Image 17
Page 16 Page 18
Contents PRS-D1200M Before Using This Product ContentsAbout This Product Information to UserVisit our website Setting the Unit Input Switch Mode Select SwitchPower Mode Switch Gain ControlGain Control of This Unit Setting the Gain properlyTo prevent damage and/or injury Connecting the UnitSpeaker connection instructions Connection DiagramSystem remote control wire sold separately Battery Wire and Ground Wire Size Connecting the Power TerminalConnections when using the speaker input Connecting the Speaker Output TerminalsUsing the Speaker Input Single Amplifier Connecting the Speaker WiresSpeaker Connect to a car stereoTwo Amplifier Two Amplifier Ex. BridgeMode Select switch must be Sync INV position Mode Select switchFour Amplifier Ex. Bridge Must be in Master positionConnecting wire with Sync in RCA pin plugs sold To 8 Ω Mode Select switch For details, seeFour Amplifier To 8 ΩTo prevent malfunction and/or injury InstallationExample of installation on the floor mat or on the chassis Attaching the bass boost remote controlReplacing the top cover Screw Top Cover Tapping-screwsSpecifications Table des matières Service après-vente pour un produit PioneerAvant d’utiliser cet appareil Etats-UnisQuelques mots concernant cet appareil Visitez notre site WebRéglage de l’appareil Commande de l’accentua- tion des gravesTémoin ’alimentation Sélecteur infrasonoreCommande du gain Commutateur Mode SelectCommande de la fréquence de coupure pour LPF Commutateur Power ModeRéglage correct du gain Commande du gain de cet appareilPour éviter toute anomalie ou blessure Raccordement de l’appareil’allumage Schéma de raccordementFusible 40 a ⋅ De masse Raccordement de la borne d’alimentationConnexion lors de l’utilisation de l’entrée de haut-parleur Utilisation de l’entrée de haut-parleurRaccordement des bornes de sortie vers les haut-parleurs Amplificateur unique Connexion des câbles des haut-parleursDoit être sur la position Master Deux amplificateursLa section Schéma de Le commutateur Mode SelectRaccordement À 16 ΩÀ 8 Ω Doit être sur la position Sync Quatre amplificateursDoit être sur la position Sync Pour éviter toute anomalie de fonctionnement ou blessure ’installez pas l’appareilRemise en place du couvercle supérieur Fixation de la télécommande d’accentuation des gravesCaractéristiques techniques Antes de usar este producto ContenidoServicio posventa para productos Pioneer EE.UUSobre este producto Visite nuestro sitio WebControl de refuerzo de graves Ajuste de esta unidadCubierta superior Interruptor selector subsónicoInterruptor Power Mode Interruptor Mode SelectControl de ganancia Control de frecuencia de corte para LPFControl de ganancia de esta unidad Configuración apropiada de la gananciaPara evitar daños y/o lesiones Conexión de la unidadInstrucciones de conexión de la Diagrama de conexiónToma Sync Output / Sync Terminal de salida de altavozTamaño del cable de batería y cable de puesta a tierra Conexiones de terminales sin soldaduraConexión del terminal de alimentación Uso de la entrada de altavoz Conexión del terminal de salida de altavozAmplificador simple Conexión de los cables de altavocesA 8 Ω Dos amplificadores Puente externoDos amplificadores Conexión del cable con El interruptor Mode Select De automóvil. Para losConexión del cable de altavoz Vendido separadamenteEl interruptor Mode Select El interruptor Mode Select Para los detalles, consulte laCuatro amplificadores Debe estar en la posición SyncPara evitar fallas de funcionamiento y/o lesiones InstalaciónCubierta Recolocación de la cubierta superiorEspecificaciones Å„ÛÓ 1-óÓÏÂ, å„ÛÓ-ÍÛ, íÓÍËÓ 153-8654, üÔÓÌËfl Pioneer Corporation

PRS-D1200M specifications

The Pioneer PRS-D1200M is a powerful and versatile monoblock amplifier designed for car audio enthusiasts seeking premium sound performance. With a sleek and compact design, it seamlessly integrates into various vehicle setups, making it an ideal choice for those looking to enhance their in-car audio experience.

One of the standout features of the PRS-D1200M is its impressive power output. This amplifier can deliver up to 1200 watts of maximum power, allowing it to drive subwoofers with ease and produce deep, rich bass that truly enhances music enjoyment. Its RMS power rating stands at 600 watts at a 2-ohm load, ensuring a reliable and consistent performance even during prolonged use.

The PRS-D1200M incorporates advanced technologies to ensure high-quality sound reproduction. One such feature is its Class D amplifier design, which not only boosts efficiency but also minimizes heat generation. This design allows for a smaller and lighter unit, making installation easier while still delivering robust audio performance. Additionally, the amplifier is equipped with a high-pass filter, low-pass filter, and subsonic filter, enabling users to fine-tune the sound output according to their personal preferences and audio setup.

Another key characteristic of the PRS-D1200M is its high-quality build. The sturdy construction of the amplifier ensures durability and can withstand the rigors of automotive applications. The unit also features a sophisticated thermal management system, which helps to prevent overheating and maintains optimal performance levels.

Installation of the PRS-D1200M is made user-friendly with its well-organized layout and clear labeling of input and output connections. The amplifier is compatible with various audio sources, making it a versatile addition to any car audio system. The product also offers adjustable gain control that allows users to optimize the output level based on their specific audio requirements.

In conclusion, the Pioneer PRS-D1200M combines power, performance, and customization options in a compact and durable package. Its advanced features and technologies make it an excellent choice for anyone looking to elevate their car audio system with a reliable monoblock amplifier that delivers exceptional sound quality and powerful bass response. Whether you’re an audiophile or a casual listener, the PRS-D1200M stands out as a top contender in the automotive audio market.
Top Page Image Contents